There are usually only 2 bolts on a bosch motor, it then (depending on type) slides bacwards or forwards on the spigots.
Sometimes it takes a gentle tap to loosen it or a screw driver on the motor mount to prise it apart (I usually tip the machine forward about 30 degrees and lean it on a wall to allow the drum to move forward and give you more room to work)
Sometimes it takes a gentle tap to loosen it or a screw driver on the motor mount to prise it apart (I usually tip the machine forward about 30 degrees and lean it on a wall to allow the drum to move forward and give you more room to work)