accenta

Hi all, I had a cupboard fitted recently and the chaps had to disconnect the control panel. I powered down the system, alarm went off, code entered etc, then carefully took the pad off. It's all back in place and the tamper alarm works, sets off the speech dialler and the external siren is...

After cutting power off and turn back on, the siren of outdoor bell box and the keypad goes off, I can't stop them in anyway (unless cut off all power source). I have already replace new backup battery. There is no response when I input the alarm code. I've also tried to reset to default but...

System log:- 205) SET PRGRAM 21:35:57 206) ENTRY START 13:11:46 Zone 1 207) ENTRY TIMEOUT 13:12:15 Zone 1 208) INTRUDER 13:12:51 Zone 1 209) INTRUDER 13:13:05 Zone 1 210) INTRUDER 13:13:07 Zone 1 211) INTRUDER 13:14:21 Zone 1 212) INTRUDER 13:14:27 Zone 1 213) INTRUDER 13:14:34 Zone 1 214)...

Hi have an issue with an alarm, where it takes over a minute to sound once activated? I have spoken to honeywell who didn't know and they suggested a factory reset or replace the unit? Not sure if this is easy or Can anyone recommend a good installer to the reading area who could do this? Cheers...

Hi, we've just moved into a new property with what we believe is an Accenta "Ideal" house alarm. The previous owner didn't know much about the alarm and said it hadn't worked as long as she had lived here and had no idea about the code. We've discovered it's missing a fuse and will put a new one...

Hi I recently replaced 4 PIRs on my system for Pet Friendly ones. I put the system in to Engineer mode to prevent any tamper alarms. When I removed the first PIR (Zone 4), I accidentally touched some of the wires together which triggered the alarm. I stopped the alarm by entering User Code...

Hi there, I have an Accenta G3 alarm that makes all the right noises to set but then does not activate when I try and set it off. There are no errors showing on the keypad. There are 3 PIR sensors connected and i have completed the walkthrough in Engineer Program Mode and they all work...

I have a sealed magnetic contact connected to the Accenta Gen4 on my wooden shed door, I replaced it with a sealed metal contact on previous advice near 2 years ago. Previously I used the standard white plastic contacts and even tried a heavy duty contact for a gap that is always near enough...

We have a accenta /optima alarm. The tamper kept going off. We have removed the wires for the bell box tamper and put a loop in. The alarm seems to be functioning ok but the leds on the bell box are not flashing. So from the outside looks like its not working. Queation is...can i leave the t...

Hey Everyone, I'm on the last part of replacing my old accenta 6 with the new Accenta Mini G4, pirs working, panel working, all tampers fine and lastly, just had to mount up and install 2 new sirens as the Accenta Mini G4 kept freezing with my old sirens. The issue I have now is with the new...

Hey Everyone, Just needed some advice, basically I've moved from an Accenta 6 and upgraded to a Accenta G4 Panel with an LCD keypad. Everythings gone well so far, pir's are working, internal siren working, door contacts all good, so the last step I wanted to do was hook back up the 2 bell boxes...

Hey Everyone, I've just replaced my old accenta 6 panel alarm with the a new G4 panel and everything seems to have gone well, keypads working..etc However I just wanted to do a walk test and upon going into the menu, it keeps beeping away and showing all 1's on the display. It doesn't give me a...

I have moved house a couple of months ago and we didn't have any contact with the last owner as it was the family selling the house. The house has an old Accenta alarm system, it seems to be in good order but the problem is we don't have any of the codes to reset the system. I opened up the...

Hey. I have a Accenta/Optima Mini G4 that was installed by the previous owners of the house I've recently moved into. It was all working fine the RCD in the consumer unit was turned off so that some electrical work could be done elsewhere in the house. I thought nothing of it, once the work was...

Hi I am after some help... My battery died and I have bought a new one and refitted this after a few days of having no power going to the alarm. The keypad buzzer went off and this was reset and silenced. After I re-applied mains power the main alarm bell sounded but can't be silenced with the...