clock

Hi All, Hoping someone could help with this problem. Once I set the date and time on the Hive 2 thermostat, the display stays on that day/time (i.e. date/clock does not increment), meaning I can't set timers for central heating. For example, if I set the date/clock to 17/Oct/2023 09:20 in the...

Hi - does anyone by any chance have a photo of the wiring for a Rangemaster 110 front facia panel, particularly the indicator lights and thermostat area (cooker was bought in 2005)? We've had to replace ours today (fire damage) and I think looking at it the wiring isn't right. There should be...

Glowworm 30ci Combi. The mechanical heating timer clock became intermittent so I bought a replacement on-line. When fitted the replacement one, it did not work at all. I put the original back in and that now doesn't run either. Looking at the back of the clocks it shows the need for 1.2 - 1.6 v...

I have inherited a Wien Solid State Digital alarm clock; the digital type with flip numbers. I haven't dated it yet but I'm guessing it's from the era between the late 1960s and early 1970s. The unit works fine and is a pleasure to have. It also has a very loud alarm sound which is perfect for...

This unit is about 6 years old. Previously on a power failure, pressing the ON button would restart it with the correct clock time again, (probably dependent on the time without power}. Lately, after 3 hours without power, pressing the ON button causes the indication light to come on briefly...

Hi, I have inherited a rangemaster Toledo 110 gas. I was having issues with the clock. The buttons were all jammed in and bent up. So when the oven went into auto mode I was unable to return to manual and my gas ovens were locked off. After a few days the clock then just died. I've ordered a...

Hello. Have a recently installed Sundial RF Pack 3. Clock reverts periodically (4 times in last month) to default (2010) - seems to be random fault. This is third new controller - exactly same problem. System otherwise OK. Has anyone got same problem ?