code

  1. SithLordHood

    Texecom Prem Elite - Codes & Tag query

    Hi, I am trying to set my Texecom Premiere Elite so that i can use the tag to set the alarm but the alarm can only be unset by entering a valid user code (not via a tag). I have a key box nearby the alarm panel where everyones keys are stored, each persons keys has their own tab for the alarm...
  2. P

    CWS float valve: part1/2 compatibility

    Tonight the arm of the ballcock feeding the cold water storage cistern in my attic broke (quite puzzling: maybe due to strong wind causing some turbulence??). Anyway, I need to replace it. I know it's faster to replace only the part inside the tank, undoing the very last compression nut. But...
  3. P

    One isolating valve on both loft tanks inputs?

    Hi, just after the mains stopcock under my kitchen sink I have a tee, one pipe to drinkable water+washing machine and the other to the loft cisterns (talking about an open vented pumped S-plan system, standard here in UK). I was wondering whether it is safe to add an isolating valve on the...
  4. N

    Menvier TS690 - code not working since power loss

    Hello, I have a TS690. After a recent power cut the battery also died. When power came back, the alarm would not silence saying battery fault, so I disconnected from mains and ordered a new battery. Fitting the new battery (whilst still disconnected from mains so not to activate outside...
  5. R

    Miele Error Code Chart

    Hi all. Trying to find what this fault code on my T294C Dryer means: It starts up but does not heat up. Have had previous faults of starting up with heat but then shutting down after a few minutes with beeps. I have trued a new Miele NCT (temp sensor) which made no difference. Wiping the...
Back
Top