construction

Hi all, I saw this image online and I’m just curious to see if this is structurally a good method to join rafters on top of a ridge beam. In the photo you can see the rafters are beside each other and nailed rather than flush cut and butted up against each other and nailed. To me it has to...

I cannot get my head around how I’m going to do this! Ideally I want the wall plate sat back so it isn’t exposed too low. Structural engineer said I can do it either way, sit on top of shorter beam coming out of extension or sat on the post, I can’t see how it would work on picture one? Can...

I'm removing a section an old airing cupboard and will be closing the opening with a stud wall. I've had an engineer give me the thumbs up on removing it. The stud wall will be plasterboarded and tiled and a radiator and cabinet will be installed on it. The existing cupboard wall is made from...

Hi all, I have a single skin brick shed at the bottom of the garden that I want to renovate and convert to a office, I want to replace the existing wooden door and windows (if you can call them that) but I'm not sure how to go about it, the lintel is in two pieces and I'm not sure if it will...

My wife and I have moved into a 60's fixer upper which has barely been touched in 30+ years. With the cold setting in, our porch is starting to develop a lot of condensation and damp (photos are from when we moved in). It's UPVC with no insulation and there's just a very thin stud wall with a...

Hi All! First time post but have been a long time reader of the forum. I bought my first property in 2020 which is a 1970's maisonette which includes a single garage which is one of the middle garages in a row of 4. Last winter and whenever there is heavy rainfall the garage becomes damp as...

Not sure if DIYnot is the best place for this question but I can't think where else to ask, so here goes... I'm hoping someone in the building trade or just experienced in these things can offer some general advice when it comes different house constructions. To give a bit of background - for...

Hi, I'm building a workshop at the top of the garden..it's 6x3.5m. the slab has been poured but due to a mess up on my part it has a 0.5⁰ slope from the back to the front, putting the front around 50mm lower than the back. It will be a timber framed workshop on a single course of bricks (which...

I’m looking for a little advice re; the construction of mine and my neighbours terrace of houses. In the last year or so we’ve started to suspect that rats have accessed our cavity walls and are moving between the properties. We have each noticed burrow holes coming out from close to the...

Hi folks, I need advice for my master thesis regarding the construction of walls of one-storey buildings with a floor area of 100 m2. There are only a few questions left, I can not answer myself (standard method, required manhours, # of workers needed). I would really appreciate it, if some...

Hi All, Enthusiastic amateur here - I've fitted a couple of bathrooms, a kitchen, false walls etc, but I'm no expert. I have a desk job, so I enjoy doing something practical in my spare time. Not sure if you can help with a question about moisture, but thought I'd ask... I'm planning on...

I have a semi detached property in BUCKS. On appeal, PP was granted for a front dormer window. The architect said I should only apply for PP for the dormer as a rear loft conversion I also wanted to do would fall under PD. Now that I am looking for quotes, someone raised concerns about...

Hi folks, first time poster and newbie but I’m in the middle of renovating my living room and the previous owners had removed and bricked up the fire place. I’ve removed the plaster and my intention is to open it back up and have a cast iron insert installed. I believe I can see what would be...

Hi all, I have a crosswall contruction property and have been told that side walls are the only supporting walls. The downstairs consists of a hallway, kitchen and lounge and all walls between them are hollow sounding. I want to knock down the wall between the kitchen and lounge. Is this safe...

I am having a room re-plastered in a house I am renovating for rental. The plaster is old and has been taken back to brick. The exposed brickwork now shows an unusual arrangement around the window. To my untrained eye, it looks like a previous owner has attempted to reduce the size of the frame...

Hi all, I'm an established gas engineer/plumber and have recently gone into business with the only decent builder I have worked with. We have a decent volume of work but we're looking to expand, and want to get a number of crews on the go at once. As such, we need to get a decent amount of...