deltabell x

Hello, I am looking into a Deltabell X and i am a little confused. Could somebody please confirm whether the deltabell X twin piezo is 104 or a 109 dbA external sounder? On cctvcentral it is rated as 104 dbA. My second question is, what is the difference between the deltabell X grade 2 and...

Hi all, Losing my mind a little, I’ve got a pyronix enforcer alarm system and a deltabell external sounder. I have lights etc on the box however when I run a siren test from the control I’m not getting anything. On the panel my outputs are 14 strobe and 16 bell...is there something I’ve...

Hi all, Looking for some advice on location for a pyronix enforcer alarm panel. I want to be able to wire it to a deltabell lightbox. Is it simply have it installed in the attic as I can’t see me being able to wire it down to the hallway area? thank you in advance!

Hello I am looking to find the technical specs for a deltabell X sounder to see which bell box has the brighter comfort LED's from to 2. Pyronix dont offer much info compared to Texecom. Can anybody please advise? The 2 screenshots attached are what i found Thanks again

Hi, Hoping someone can help.... I've fitted a lightbox module (FPDELTAX-Light) to the inside of the lid/cover (FPDELTA-CW) but can't seem to close the lid. The lightbox cable gets in between the lid and deltabell x module (FPDELTAX2MOD). The back plate is FPDELTA-BDB. What am i doing wrong...

Hi there wonder if anyone can help. Recently had installed a Pyronix Enforcer kit with a Deltabell X Grade 3 which was working fine. The enforcer became faulty after 9 months so I replaced it with a Texecom 64W being the hard wired keypad still keeping the Deltabell X. The alarm was fitted by a...