dimension

Eg by forest_cyclist posted 19 Sep 2021 at 4:31 PMHow is permitted development area measured for extensions, porches, conservatories etc? Is it roof area, external ground area, additional area built, internal area created etc? We have a few areas like ground floor balconies which are part of the...

Good evening, Could someone tell me what the best function to use to trigger floodlights on a Dimension via RIO? I have a working relay set up, and is triggered fine by the panel and does cause the floodlights to turn on and off. I had the RIO output set to trigger if the BELLS were on - since...

Hi, I'm having frequent (couple times a day) keyboard lost-problem with TouchCenter Plus connected to GD-48 (firmware 7.something). Keyboard diagnostics give connection quality varying between 0% and 100%. Cabling is Cat5 unshielded/ Cat6 shielded, last part to mk8 keyboard is 2-pair shielded...

Hi, I would like to fit a closed couple toilet to replace the rather bulky old style one. My main worry is that in the past I’ve had one fitted by a plumber and the cistern ended up about 30mm from the wall. At the moment the front of the 90deg pan connector is 160mm from the wall and the centre...

Hi all, I've registered to see if someone can help me fault find this issue. This is on an existing Galaxy Dimension system that has been running fine for over a year. GD-520 with E080-2. I can update this post later with firmware versions etc. Immediately after unsetting, a comms line fail 4...

Hi All, Does anybody have any experience with wiring up key switch zones on a Honeywell galaxy system? I seem to be stuck with getting this to work. Instead of an actual key switch, I want to use a relay to allow remote setting/un-setting. Looking at the manual, I need to change the...

Guys, Quick one, I’m probably being thick. What the hell do these dimensions mean with most measurements including “+-“ and a second set of digits... I just want to know at what height above FFL the centre of the pan outlet sits... 180mm, 195mm or 170mm?!

Hi All, I have a Galaxy Dimension 96 installed and set up which is fully operational apart from the external bell boxes. The two bell boxes are both Pyronix, Different models hence only one has the ability to disable the back light. I am able to wire them to either the main panel or to a...