door contact

I have a Texecom Elite 64 alarm system. I would like the alarm to sound when the door contact is open but reset as soon as door is closed this would need to be 24 hours. What attributes would I set for this?

I have a Yale EF Kit 1 which has been working fine for about 3 years. I replaced the batteries recently (which I've done successfully in the past) but both my front and rear door magnetic contacts have stopped working (i.e. they don't trigger the alarm). Everything else in the system is working...

Hi, Took some doors off to paint recently, and also fitting some new hinges. I've hung the door but the top corner is sticking out slightly and not sitting flush with the door. Here are a few pictures. Top Hinge: Bottom hinge: Other side of door: It's not totally clear from these...

Hi can anyone help, had our front door replaced, door contact was pulled off which triggered a tamper. Tapped in code to cancel the sounding alarm. The door contact was fitted back to the new door as it was, however we are left with a yellow warning flashing on the panel and can’t get rid of...

I have a sealed magnetic contact connected to the Accenta Gen4 on my wooden shed door, I replaced it with a sealed metal contact on previous advice near 2 years ago. Previously I used the standard white plastic contacts and even tried a heavy duty contact for a gap that is always near enough...

Hi, I am in the process of swapping out an old wired alarm panel for a texecom elite 24. I have replaced most of the detectors with new, but was hoping to keep the existing door contact which is fitted into the door frame. Does anyone have any idea how to wire the contact shown in the...