door frame

Really hoping this is something I can fix adequately rather than pay someone but have no idea how to proceed. Panels to the left and front appear to be wood, two wooden uprights are all rotting from the bottom up, damage doesn't seem to extend too far up though. Mortar around the visible brick...

Afternoon all, I've recently had a bunch of new frames, doors hung and new architraves in my house. For the most part, the architraves fit snugly with only 2-3mm gaps, which I reckon a quick bit of decorator's caulk will sort. However, a couple of them have disconcerting 10mm+ gaps. One of...

Hi Today I have been investigating some damp plasterwork in our 1920s semi-detached house. We have what looks like a uPVC front door fitted by an owner before us and on peeling back the PVC surround I can see a rotten piece of wood on either side of the door frame (bottom right of the attached...

Hello We have a doorway which have no door installed, nor does it appear to ever had a door installed. I expect the doorway has been added to the house at some time It has a wooden frame, with a sand/cement edge (painted over) and then has wooden architrave attached to the send/cement. See...

Hi. I don't have any building experience at all :eek: but I am going to have a go at making my own tool storage shed out of blocks (roughly 3m by 1.5m and just high enough to walk in). I'd appreciate any comments and suggestions on my "plan". As I progress I'll think more about each step before...

Good afternoon, I've seen a couple of similar posts on here but I'm still can't work out what's going on here. As you can see from my attached photos, there is excessive damp, mid height around my back door frame. The external brickwork has been repointed recently and looks watertight. The...

Door for utility has no archatrave framing and it is flush with the plasterboards one side however not on the other, pic below showing what it looks like, what would be best way to sort this? Maybe sande it to a chamfer or would it be better to cut some of it away so that I can fit some...

Hi all, I am looking to build a stud wall into an archway to take a set of double doors. Just want to check what size I should make the space in the studwork to take the doors please. The doors I have are glazed, 1981mm(h) 1524mm(w) (both doors) 35mm(D). I have a 10mm Pairmaker to go between...

Hi, I am looking to put double/french doors into an archway at the bottom of our stairs leading into the lounge. The existing is a brick wall at one end and the end of the wall between the lounge and stairway. The space is 1800mm wide x 2160mm high. The width of the wall it will butt up to is...

We have a Spectus patio door frame between our lounge and conservatory. We've already had the doors removed. We were hoping to remove some plasterboard and pull the frame forward but we've found out that 10-15mm of the frame is behind brickwork ... which we don't want to touch. We can't find...

Hi, I need to fit a new FLB external door to replace an old one. The door itself is easy enough to get as they are much the same from the same suppliers. Question is, which door frame do i need? https://www.expressdoorsdirect.co.uk/door-frames/external-door-frames I'm just after a simple door...

Hi guys, Just wondering if it's a good idea or pointless to prime paint a door lining/casing in situ before plastering around it to try and block moisture getting into the frame and possibly having it swell as a result? is this a thing? Overthinking?

I have been struggling with how to start and go about building the frame/door lining for a door that needs to have a notch taken out of it to fit under the stairs! I iwould appreciate someone who might have done something simialr to run me through the steps. Have a fairly good idea of how to...

I have a stud wall that has finished depth of pretty much spot on 100mm I have planed timber door lining that is about 108mm is 4mm on each side too much to ask of skimcoat? should i be thinking of getting 2-3mm off the door lining timber or is there smarter ways to do this?

I have a hardwood timber door sill that has rotted away. Not sure how it's rotted so bad. How do I fit a new door sill? If I slide it in beneath the door jams, how do I secure it in place? The old one appears to have been nailed to the door jambs - the rusty nails can still be seen protruding...

We have a small gap (worse on the left side) running around the door frame of our 1900 terraced house. The frame is wood. What's the best type of sealant to fill this gap? Would an outdoor silicone sealant like this be best...

This is not exactly a DIY as I won't be doing this myself. I wanted to ask for the collective wisdom of what type of contractors this will entail (who will I need). I want to increase the door height in my flat. Above the existing doors is hollow (plaster) and can be knocked down. I will need a...

i`m in the middle of full renovation and because i`m going to convert my loft build regulation want all the door to be fire rated. As Next week the plaster will come down I have to buy and install the door frame to make sure the plaster will align with it. As I never purchases a door lining...

we are converting our garage and will need to replace the door and lining (the original door + lining never fitted) however it appears the off the shelf linings are not wide enough. On the assumption of 100mm thermalite, 12mm boards, dabs 10-20mm walls a little out and 3mm skim, making the wide...

Can I remove this cupboard safely and move the door over? I want to remove this cupboard and then move the right door over in the hallway into the left hand side where the cupboard is now. Doing this will add so much room in my bedroom. I wanted to make sure this cupboard isn't holding the...