doors

Hello, we’ve recently moved into a Victoria house that was rented to tenants for decades. The architraves are scuffed and covered in many layers of paint. What’s the best way to make this look nice? Replace them or try to strip and repaint? I’ve attached a pic of the architrave around the front...

My joiner left a wardrobe project unfinished. He had said that he was going to put supporting rods behind the wardrobe doors, which are basically three 3m tall sliding doors. I haven't found on google something that classifies as a wooden panel supporting rod, I don't know if he had something...

Hi all, Hope you’ll be able to help. I’m getting the hallway and stairs of my new house replastered and realised we’ll have to sort out the door frames too prior to plastering. Not sure if the architraves need replacing too? They're all just a bit beaten up through a lack of maintenance and...

I have a couple of solid core 44mm fire doors that won’t be fitted for a few months. One is finished and the other has a narrow glazed panel and hasnt been finished. I did have them vertical leant against the wall for about a month, but I just read that can warp them. I don’t have room to lay...

Hi, I have a tilt and turn door that operates in an unusual way. This is a left hinge hanging door; looking at door from the inside, the hinges are on the left and swings inwards. The standard or typical positions to open/close/tilt the door should be as follows: 6 o clock position (close...

I need to replace 45mm-wide architrave on some internal doors. I can’t find much architrave of that width that I like. Is it possible — or even advisable —to buy wider-than-needed architrave and trim it down without compromising anything?

Hello all. We are having a loft conversion and would really like some built in wardobes to fill most of one of the walls. After hearing some pretty frightening quotes from other people who have had built in recently, I have decided to get the wardrobe CNC'd at a local place in 18mm MR MDF...

Hi, I'm looking to have a local company purchase and install a composite front door and they use Solidor and Door-Stop. They recommend Solidor over Door-Stop but the Google reviews look atrocious for Solidor with so many complaints (114 reviews and around sixty of them giving 1 star very bad...

Hi all, We are currently week 7 into our garage conversion and the doors and windows have just been installed and plasterboard and plaster now completed by our builders. Whilst we were painting the room, we noticed the plasterboard and plaster actually goes over the door/window frames which I’ve...

I recently bought a factory-primed white door from Wickes. I was told by their customer service team that it was ready to paint using a water-based paint. I was recommended their own water-based interior wood paint. However, after two coats I’ve noticed the paint is very blotchy. I painted the...

Hi I have bifold doors in place with the magnet to hold the door open set in the middle (going by what manufacturer set out), but the door comes away from the magnet when even slightly windy. A second magnet can’t be placed nearer to the end of the door because of the restriction with the...

I have a 3m x 4m conservatory, upvc windows on both sides with double doors in the ctr of the 4m frontage with windows either side of the doors. Recently I have noticed the top of the door and window frames sagging making it difficult to close and lock the doors. I removed the utility board...

I'm hoping someone can offer some advice or has previously purchased either brand. We are having 6 metre wide sliding doors installed into a new rear extension. Both options have 3 panels and use aluminium frames. Smart Viso - 35mm interlock sink in track direct fix 3 panel slide in both...

looking to hang a couples of side hung doors on a sectional garage. whats the best way to fix the Hinges to the concrete sections. if I build a wooden frame how do I fix it securely. door are jeld-wen wooden at 40kg for the pair. 2134x1981 oepening for doors any suggestions on frame and Hinges

Hi, I need to fit a new FLB external door to replace an old one. The door itself is easy enough to get as they are much the same from the same suppliers. Question is, which door frame do i need? https://www.expressdoorsdirect.co.uk/door-frames/external-door-frames I'm just after a simple door...

Hello All, I've just purchased some new internal doors and they have come with these metal plates in the slots cut for the hinges. There's three of these per door (top, bottom, middle) and I've tried (unsuccessfully) to find the correct hinges that with either fit into the attachment or into...

I recently had new glazing fitted in the front door and it's surround. The joins between the glass and the wooden frames are uneven and bumpy. Should I use caulk, then paint over it, or wood filler? Glazing sealant? Thanks for your advice

Now were in Covid lockdown might as well replace kids old bashed Flush Hollow Core Doors. Who got best price online?. Nothing fancy (eg flush like our other doors) as price important. Thx..

Hi, I got my internal porch door which I 'm unable to find the key anymore. The door is already unlocked but the cylinder won't come out as usually the pin inside keeps it stuck. On youtube, a guy snaps it on both sides but to be honest I'm worried to apply a lot of force as I will be damaging...

I know could sound a very stupid question but I have removed my old door and would like to order new ones. I have the structure opening dimension at the moment and don't trust the old door as it ms like they were customized in size. For instance, what would be the difference between structure...