dust

Hi ive been having bad Allergies and have just discovered dust is coming in from the ceiling it is coming in between gaps in the recess lights in ceiling (I live in top floor flat) . Took a couple of photos, I pulled one light down. Seems very old. Is this how you install a ceiling light? It...

Not long before we have a carpet fitted (with underlay) in our front bedroom once plastering and decorating completed - normal floorboards with a small void (where you can see some dust, debris and wiring) between this room and the lounge underneath. Does anyone know if you need to 'fill' gaps...

Hi, We are soon to be having two of our bedrooms re-plastered. I have a young family and don't want to expose them to any 'nasties', i.e. dust, wet plaster fumes as the walls dry out. Is it safe for us all to be in the house while the plastering is taking place? I'm guessing that the best we...

Hi, I have a mid 1940s house so am assuming that the wooden skirtings, door frames etc are likely to contain lead... Should I be worried that many areas have chips exposing bare wood underneath and a few areas are flaky, potentially exposing my family to lead? (I used to think that as long as...

Hi Forum, The hub cap on the front near side wheel has come off whilst I was driving. I have noticed that the Wheel Bearing Dust Cap is also missing. I have looked on the web to find one. I can find one to fit other cars on Ebay (a Peugeot 206 etc..). Does anybody have any suggestions as to...

Just recently purchased a Makita LS1018L and, although the dust-collection bag puts up a genuinely worthy fight with the sawdust, I've been out and purchased the Wickes wet-and-dry vacuum, as recommended in many places, in order to connect to it to help out (plus general tidy-up). I'm...

I got given a rather good miele tumble dryer model T7934 - The previous owner was "upgrading" to a integrated heat pump variety. The problem was, they did not really look after this thing properly. They rarely cleaned the lint filter or checked/cleaned the seals. This resulted in dust making...

Dust collection is important for anyone doing woodworking (for the sake of our lungs). I've looked at a number of DIY cyclone dust collectors and decided to build this simple design using a simple bucket and ABS fittings: I didn't put in a baffle but it seems to still work ok. Does anyone...