extractor fan not working

Hi folks, The extractor fan for my en-suite has died, which has surprised me a touch, as the property was a new build when I moved in about three and a half years ago, and it's not had nearly as much use as the extractor fan above the main bathroom. The fan is situated in the loft above the...

Hi, I can't think of another word, but my Vent Axia VASF100T stopped working about a week ago. When I take off the fan cover to show the fan blades with the isolation switch on, the blades are what can best be described as twitching. They are rotating maybe 2mm ever second or so, but never...

Help required for some pensioners. We have extractor fans in each of our bathrooms which are triggered by flow switches on the cold water feed to the showers (one shower is electric so fed by cold water only, the other is a mixer with cold and hot feeds). These work correctly most of the time...

Our shower room extractor fan has stopped working not long after I tried to clean the blades of dust etc. There’s a slight buzz when the light is on and a deeper nasty buzz after the light is switched off (it’s a timed fan). This lasts a few seconds. The fan blades are still able to spin. Is it...

Hi all, Vent Axia Solo Plus HT (Model 427479) power but not working I have a Vent Axia ceiling mounted extractor fan in an internal bathroom which has not been operating for the past few months. The unit is connected to the light switch and seems to be connected to the power as a blue LED...

Hi, Just had my bathroom fitted out this week and we had an Airflow Icon 30S (12v IPX4) fitted above the shower head. However, the electrician is pulling his hair out as despite checking the wiring on several occasions, and there been a green light on the transformer of the icon unit when you...

Hi, I have a Baumatic bti975gl cooker hood... it sounds quite loud when you switch it on... and the vent seems fine as when I go to the outside wall of the house it is blowing air out quite well. However, it is not sucking any air above the cooker... even with the filters totally removed. All...

Hi I hope someone could help explain in simple terms what I am struggling to understand. I had an extractor fitted about 5 years ago but speed was always slow (dimmer light switch fitted). I replaced the GU10 50W with LED 5W and they always stayed lit even when switched off...I think even the...