fence panels

Hi. I've got a 1800mm concrete posted fence which has a 10 to 20mm gap between each of the 20mm x 140mm palings/ boards. This I assume is to allow moisture swell and wind to come through the fence and stop it from sailing across the gardens. This is fine and generally wouldn't be a problem but...

How can I remove these concrete fence posts they are embedded in my concrete driveway. I am not comfortable using a jack hammer nor a large circular saw. I have this small saw: DeWalt DCS571N, would it be possible to use it to cut then out of place? When putting new fence posts in, I am...

Hello, I can't find any advice anywhere. I have new 1.8m wide fence panels to put in the back garden. The panels are exactly 1.8 meters wide but the gravel boards are 1.83. should I pack out panels to 1.83 or cut gravel boards down to 1.8? I am using durapost system so could easily cut down the...

hi guys, I’m planning on cladding over my fence panels with roof battens as in the picture posted, my question is will this work with concrete posts? I plan on bolting a length of treated 3x1 for example to each concrete post and screwing the battens to each post. Over a length of 5m. The...

I am putting up a fence to replace an old brick wall, I removed all the bricks down to the concrete foundations. Do I try and get up the foundations and postcrete the fence in or should I use a 4" post shoe? The posts are substantial and quite heavy, not sure how good post shoes are?

Hi All, I need to replace a garden fence panel, it's been on my to do list for over a year now :( I can get a 6x6 ft panel, but the replacement doesn't look so straight forward. Is anyone able to point me in the right direction please? I'm willing to give it a go myself, but not great at DIY...

Hey Guys. I have a garden that currently has wooden fencing. Over time, weathering and lack of maintenance have made a majority of it come down. I have decided to do a DIY job on it. I want to install a concrete posted fence with wood panels. Dimensions: Length 570 cm (between house and...

I have hired someone to put up a new fence. We’ve asked for 5 ft 6 inch panels with 6 inch gravel boards and 1 ft trellis. Our gardener has said that he can’t easily acquire the 5 ft 6 inch panels so he’s suggesting cutting a 6 ft panel to size. Can anyone tell me if that’s wise or could it be...

Hi, We have a fence which separates our garden from a neighbour, according to the deeds and old correspondence it belongs to us. It is in a poor state, there are about 20 overlap waney style panels 6 x 4 ft, more than half are rotten, two or three are missing completely. The posts and gravel...