flush

My flush was working fine, then the box with the cable started to come off when I press the flush. I cannot see if anything is missing or broken. Cannot see why this started. Any help would be appreciated.

I have a toilet with a concealed cistern and there is an issue with one of the flush valves leaking (the bit circled in green in the photo). The flush plate says Geberit but it doesn’t seem like the flush components actually are Geberit (Geberit replacement parts don’t fit). Can you identify...

Hi, I’ve just moved into a house with a push button toilet and it’s not working. The buttons just feel loose and you can’t press them. I’ve had a look, and I can see that when you push the button it’s meant to pull a cable that then causes a mechanism to go up and let the water out. I think...

Evening! I've recently run into an issue with LAP 10AX brushed stainless steel light switches I'm fitting at home (with the help of my old retired sparky dad). Despite having a flat profile, they aren't sitting flush against the wall. Strangely, they seem to be bowing a bit. I've attached a...

I played around and plastered one wall. I'm happy, see picture. BUT what do I do about this window fitting. As you can see in the other picture I used beads to stop. Now I've got time to go up to window.

Help me please! Moved into this house last year, it hasn't been looked after at all. Gas combi boiler (Alpha InTec 25XE) has always just about worked. It's only ever given us constantly hot water if the tap or shower is turned on to a very low pressure. Even half pressure and it'll run hot for...

The toilet flush button (pictured with the flush system) has broken but I can’t find a matching replacement or a replacement flush system that matches the one I have. It has a bayonet fitting (pictured) which makes it extremely easy to remove/replace, hence I’m loathed to have to remove the...

Hi I have just moved into a new build house (it's 3 years old but we've just moved in). We've been in for a few weeks and we've had no problems, now the en-suite flush isnt working. The bowl looks to have less water than before; so maybe i just need to add more water!? See photo attached of...

My Mum's toilet handle on the flush seems to be stiffening up? Toilet seems to flush fine, but its stiff to pull down, and hardly rises back into place (its the old style lever type on the cistern) Have included photos of the inside of the cistern. I watched some DIY videos, which said to...

I have a pair of doors which open back against deep reveals. Fully open, ordinary handles would prevent the doors laying flush against the reveals. In fact they would make the doors stand quite proud of the reveals. So, I need flush or low-profile (12, maybe 18mm) door handles on that side of...

Hi there, hoping someone can assist with this particular headache! We had an extension built (now 2 years ago) and are currently in process of adding a patio. The key design feature of the extension was to have a flush through floor in and out of the large patio sliding doors. Now we are half...

Hi all, I have a push button toilet which flushes weakly. Sometimes it takes 2 flushes to get material down the pipe. The water currently rises to 21.4 cm in the tank. Would anyone have a solution to this? Thanks.

Hi, Our toilet is running water into the pan constantly. It seemed easy to fix: Remove the 'flush' and replace with a new one... So I bought a new flush ('universal fitting') but can not install it for the life of me. I've had to put the old one back and now it leaks worse! I can't fit it...

I'm trying to identify which Geberit flush panel this is: I think it is an Omega 20? If this is the case, I think I'm supposed to open it by pulling the right edge towards me, then sliding the whole thing left as per these instructions. But I don't want to break it, and it's not opening...

Hi, I stupidly flushed one of the screw rods for the flush button. I got in touch with Roca to ask what I would need to replace it. They said the full valve. https://www.bathroomspareparts.co.uk/roca-toilet-universal-dual-flush-valve---ah0004800r-32912-p.asp Can anyone suggest a...

For the last few days our toilet has been running constantly I had a look and the washer that seals the outgoing water seems to be hard and brittle with pieces breaking off Can just this seal be ordered and if so what is it called and where can you order it from? or is it better to get an...

Hi, I recently installed a new rad and was going to add some inhibitor in the system when I realised the water was very dirty with particles in it. Although everything seems to work ok, I want the system to be set up right to limit the possibility of issues in the future. The products I have...

Hi I've got a Grohe wall hung toilet flush. Plasterers recently removed the wall plate for the flush and now that plastering is done I want to put it back on. The problem is I cannot work out how it goes together. Has anyone fitted on of these before? I think when you press the button it blows...

Hi, I’m looking to replace domestic timber frames with flush PVC and looking for recommendations. I understand Cityglass can install Rehau (Rio) Edinburghglass seem to install veka (halo) Eurocell (modus) is also local but think I would need to find an installer myself. Anyone have...

I am fitting a new Dudley Acclaim cistern (LL 6/7/9L HP/LP B/V part no. PACWHS 315196) to an old pan and need the 9L flush. The syphon does not correspond exactly to either of those in the instructions. DudleyAcclaimSyphonInstructions by MikeAustin posted 19 Oct 2018 at 11:28 PM...