google nest

Hi. I'm new here. I've purchased Google Nest 3rd Generation learning thermostat and engineer came yesterday to install it. Live + neutral from Heatlink connected to boilers live & neutral, then OT1 and OT2 connected to the block on top of the electric board (pin 3 & 4) (see image- not mine, but...

Hi I have taken the plunge and bought a Google Nest 3rd Gen that will control both the heating and hot water. There is also a Honeywell thermostat but we tend to use the programmer as the thermostat is in a stupid place in the hallway which is freezing cold next to the door next to the radiator...

So I’m trying to replace my old Drayton LP111si timer and manual Drayton thermostat with Google Nest connected to my Ideal Logic Combi C30… I’ve followed @stem ‘s brilliant instructions so far to get the Heat Link installed, the Google Nest is working powered by a USB cable, and my original...

I am looking at replacing my basic thermostat with a google Hive. I am competent with wiring, but I cannot see how to get into the wiring terminals on the Worcester Bosh 30CDi combo boiler. Any tips?

Hi all, im a going to replace my PROCOMBI CT Plug in Wireless 24HR DIAL Thermostat with a nest 3rd Gen Thermostat. But I'm a bit confused to how best to do this. The image attached is how the old receiver is wired at the min. Can someone advise if they had done one of these before and the best...

Can't find an identical problem, so here goes. Nest v3 installed in the summer, by my local gas engineer. Don't want to bother him again as he took pity on us and charged us an unbelievably low price to sort out many issues left by a previous cowboy. Heating and hot water are on a Y plan...

Hi, We are getting a new Ideal Boiler (not combi) fitted into a 3 storey town house. It has a 2 zone system - split for downstairs / 2 upper floors. We have bought 2 Nest thermostats, one for each zone. In the downstairs zone all but the cloakroom rad have existing Myson TRVs. As part of the...

Hi, Apologies if this is in the wrong place. We’ve recently moved into a house that has a cosy geo installed which we want to replace with a nest system. Having had a look at the current installation I think I need to only use the two wires currently in the T1 box? If I’ve understood the...

Hi all, I have just moved into house which has the original 1980's thermostat on the wall. It is very worn and old, we are decorating and would like to replace this, hopefully with a Nest unit. The boiler we have is an old Glowworm Betacom 24c, installed in the loft. It is in very good, like...

Hi, Has anyone installed Energenie Smart TRV with Google Nest Smart Thermostat? Are they working good? How compatible they are with Google Nest controls? I want rooms to be controlled separately. Thanks, San