hive 2 wiring advice

Hello - I asked a friend to install a Hive receiver for me, after they thought it was finished (paired in the app) they left. It was never tested and now when testing the receiver is working but the boiler isn't kicking in This is how the wiring has been left and it looks nothing like the...

Hi all, Apologies if similar threads exist but I can’t find one specifically same as mine so if I’m retreading old ground here, please forgive me. I have searched but can’t find answers. Anyone know what Hive kit I would require to fit to a Baxi 105he? I do have a standard wall room stat with...

Hello. I've recently purchased a Hive multi zone self install kit (2 heating zones and hot water system) to replace my Horseman Centaurplus C17 and Horstmann Centaurstat 7 thermostat. I live in a relatively new house with two zones for controlling upstairs and downstairs heating, with separate...

Hi, Looking to install Hive Multizone into my new build property. Currently has 2 zones (upstairs/downstairs) Just looking for advice on the connections from the existing Heat Center JB to the 2 new Hive receivers for zone 1 & zone 2. See images for existing wiring. Labelled as: 7 - Down 8...

Hi, Looking to install Hive - for Greenstar 24Ri condensing boiler (not Combi). Current timer / thermostat switches 240V to the boiler, so I'm expecting Hive receiver to do the same I'd expect 240v AC on pin 4 of the receiver when I press the heat on button on the front of it, but I get 40v...

Hi, I currently have a 2 zone (upstairs/downstairs) central heating system with combi boiler. I use the controller set to RUN (don't use the programmer) and control the heating with the 2 wall thermostats. I want to replace the 2 wall thermostats with Hive Mini thermostats. I plan to remove the...

Hi, I've just changed from a EPH thermostat system to Hive, just wondering if anyone could help in matching the wires up for me, are they installed correctly? I've attached 2 photos showing the change I've done between them, thanks

Any help on this matter would be greatly appreciated. Back story: I purchased a house with a 2020 Baxi 600 heat only boiler and it had the original 1980 danfos102 receiver/ timer and no thermostat, so thought I’d fit a hive system as they seemed good. The issue: The central heating comes on...

I recently installed the hive v2 which worked fine. But as soon as I went to remove to thermostat on the wall it all stoped working . Hot water doesn’t fire up. Boiler fires up for 1 min then stops , doesn’t warm the rads up. Maybe I’m doing something wrong. Here’s the stat: do I need to...

Hiya. Hoping someone might be able to help! Over the weekend I’ve managed to successfully install the hive system which is working great. However, as a temporary fix I’ve left the old wired thermostat in place and turned it up to maximum temp. Hoping to get rid of our old wired stat and put up...

Hi, I had the original hive and the hub packed in. So when I saw the new one on a black Friday deal jumped at it for £110. I replace everything but now hive cannot control the boiler. I have changed any wiring. But I have noticed the new receiver has a hot water button. I attach the pic of...

Hi I had HIVE in my old house so thought I'd buy it again for the new house. I've only had combi boilers in my houses but the new house has an oil boiler on ground floor (grant euroflame 70/90), hot water tank (immersion) on the 1st floor and two tanks in the loft. I've had HEATING on , in...

Hello there I have a ideal eco 24 boiler I am trying to work out why the hive isn't working correctly Could somebody's verify if this wireing is correct please

Hey everyone, I've just ordered a dual channel hive thermostat and my current wiring looks like this On the hive website this is what a dual channel install looks like In order for it to work would i need to fill 1 and 3 or would it just work off my current install with only 2 and 4 full? I...

Afternoon I have just installed the hive combi boiler thermostat and wanted to see if I had done it right. From Myson touch v2 to Hive. Thank you in advance.

Hi I have an existing Drayton wall thermostat , which I need to remove as I have a Hive thermostat to install. There are the 3 wires coming from the backplate of the thermostat. live goes to bottom of 3 in the wiring centre, wire 3 on thermostat goes to bottom of 2 in wiring centre. The top...

Evening all, After much reviewing of other posts and online videos I had a look at installing a hive on my worcester 30cdi boiler greenstar. It already had a wireless controller through the front panel which has been disconnected. I wired it as per the 2 photos, it can activate the hot water...

Hi all, Sorry to add another thread but I’m looking for some help. I have installed a hive v3 water and heating replacing my old st699. This was prompted by removing the old thermostat that I thought wasnt working and doing nothing to find it was infact setting the heat of the house and plunged...

Hi all, we recently move house and the central heating controls need replacing as there is no thermostat and only way to control HW or CH is manually on or off and the the 1-5 dial on the boiler. I bought a Hive Active Heating kit for the system, which is a traditional vented tank system...

Hi, having a bit of trouble Boiler has a manual timer fitted that has never been used, do I wire the hive up to that or remove the link between 7 and 12 and put it there.