ignition fault

I'm having a ignition fault on my Powermax HE boiler with error code A01. There is no 'visible' spark being generated on the ionisation probes (tested on new and existing probes - 3 different units, all gapped at 3mm so the fault isn't here). However the output from the PCB is registering 180v...

Hi guys, I have a Worcester 24i boiler which sometimes fails to ignite. I have checked the following - Water pressure is between 1.5 & 2.0 when cold. - On the top, reset switch is not tripped. When It works, it works fine. I think, there is a leakage in the system as I have to top-up the...

Hi everyone, need some advice regarding my boiler, I had issues with hot water, sometimes not working, changing temperature while it was running, I thought it was temperature sensor. I have changed it but it made no difference. I've been told to clean heat exchanger as the boiler has displayed...

I would be very grateful for any help or advice on the following. About 3 weeks ago the boiler stopped igniting when a tap was turned on. To get hot water I just switched on the central heating. Or if the central heating was set to auto and already running we got hot water out of the tap on...

Hi this question seems to come round and round but each with slightly different circumstances. So I have a ideal c28 mini. It has normally one light on fast blinking. That is on one second off one second back on again. The heating is fine. However the hot water when requested every now and...

Hello, I am looking for some advice please. I have an Ariston Clas HE 30 boiler which is currently unable to detect the flame (error code 501). The first few times a reset managed to resolve the fault, but this no longer works. An engineer has suggested that there is a sub-board to the main...