interior

  1. S

    Factory-primed doors, blotchy black paint! *Help please*

    I recently bought a factory-primed white door from Wickes. I was told by their customer service team that it was ready to paint using a water-based paint. I was recommended their own water-based interior wood paint. However, after two coats I’ve noticed the paint is very blotchy. I painted the...
  2. Edward1456

    Can I use 7mm door spindle in a 8mm hole when fitting new knobs?

    Does it matter that the 7mm is a little bit loose in the hole? It's not so small that it turns/flips over within the hole. I'm just finding it impossible to find the correct width spindle for these doors. 8mm spindles were too tight. 7mm are a bit loose. The spindles that came with the...
  3. D

    Which face of Aquapanel Interior boards faces out (takes the tiles) ?

    One side is rough, the other is smooth, with the brand name, batch No. printed on. I've put up stud to enclose a new bath on 3 sides, time to put the Knauf boards on. The obvs is that the rough face will grip the cls better. So which face takes the tiles?
  4. R

    Levelling across interior wall, am I missing anything?

    Hi all, I just wanted to check with people more experienced than I that I've not missed anything major with this job of levelling out this wall. Myself and my partner are due to complete on this house soon and in the master bedroom, there is a jut where built-in wardrobes used to be...
  5. B

    Chips / Flaking in Lead Paintwork - Advice Needed!

    Hi, I have a mid 1940s house so am assuming that the wooden skirtings, door frames etc are likely to contain lead... Should I be worried that many areas have chips exposing bare wood underneath and a few areas are flaky, potentially exposing my family to lead? (I used to think that as long as...
  6. M

    Small Patch of wall plaster cracking/pushing out

    Hi! I have had a little patch, about the size of a large coin on my exterior kitchen wall, then keeps pushing outwards/cracking/splitting. If I repair it with filler, it’s fine for about a month, then gradually happens again. Any ideas? Photos attached.
  7. J

    Re-skimming old plaster repair: first with sand+cement or just finishing coat

    Hi all, While attempting to strip wallpaper in my 1912 built Edinburgh flat, chunks of the plaster started coming away. After finishing stripping I thought I'd clean up the missing plaster and attempt to patch it, but then whole slices of the plaster were coming off. So I pulled it all down. It...
  8. Eddy9000

    Filling holes in interior brickwork

    Hi there, I just moved my radiator from an exposed brick wall, and on moving it there were two holes, about 4" diameter and 2" depth. Looks like someone had tried to fix the radiator previously and made a mess of the brick, and just placed the radiator over it. I was wondering what the best...
  9. M

    Pine Knotty Interior Door - How to finish it?

    Hi, I have been researching for the past few days on this as I am newbie to this sort of area and came across this forum and decided to go for it here. Recently, we have installed 3 New Pine knotty doors. Half of the door has 2 glazed windows panels. This was brought from BQ. Now, our handyman...
  10. O

    Interior 'false' wall build

    Hi there, I'm looking to build a 'false' wall on one of my bedroom walls, and then cover it in rustic, old style painted wood. This is to hide the chip wood wallpaper (and as it's a rented property I can't strip it) and want to make minimal damage to the wall itself, so when we leave it can be...
Back
Top