led conversion

Hi, apologies for what may be a dumb question! I'm planning to upgrade a broken dimmer switch which was rated up to 250w with an LED-compatible one (the Varilight JQP401W), which is apparently only rated up to 120w. I initially assumed this would be fine as the switch only controls a single...

Apologies if this is a dumb question! I need a new dimmer switch, and figured I may as well upgrade to one that's compatible with LED bulbs (the previous dimmer was used with halogen bulbs). The Varilight V-Pro JQP401W seems to have good reviews. However, when checking the specifications I...

Evening Chums, First post on here so please be gentle... As description; I had two awful sconce lights either side of my chimney breast. I needed to re-plasterboard the wall so i took the opportunity to remove them. In their place I screwed a junction box between the stud and extended the LNE...

Afternoon all, we are trying to work out how many down lights we need for our new extension. We have looked at various websites but get conflicting information. The room is approximately 11ft X 15ft with a height of 7ft, the room has a steel across the center to support the joists. We have...

I want to change a couple of light fittings in our hall from Halogen to LED so we can get bright white bulbs to brighten it up a bit rather than the dull yellow halogens. The current light fittings are driven by Kaoyi KTB-60 and the fittings take 6 x 10W G4 halogen bulbs. We don't want to buy...

I have some old incandescent R80 downlights in my kitchen. I'd like to replace them with LEDs. Are there LEDs that work off 240 volts without a transformer/driver so that I can simply disconnect the old fitting and replace it with the new one? This is the easiest option for me because I believe...

I have a couple of windowed small office type rooms - maybe 10 ft x 12ft for the biggest one, lit with 2 double 6ft fluorescent battens. The smaller room has a single 6ft batten fitting. Price, looks, utility and effort are the main factors here. Looks are a little more important for the smaller...

As some may know, I have some old disco lights what use 24V 250W lamps. I have often wondered how easy will it be to convert these to super bright LED's. For the one that has an ELC lamp in it (Geni Mojo Spin Master 1), I was thinking about getting the following...