load

Hi all just after some advice please. We have had a side extension and now what was the landing window is to become the door way/hall way. Unfortunately the window is off centre to the required hall way so I've got to put a new lintel in above the window which means it has to be wider. The...

One pic shows the experiments I'm doing with supporting a type 11 radiator (160cm wide, 50cm high, total weight around 35kg) using universal column radiator feet. The other pic shows the detail of the contact surface between the rad and the feet. Aesthetic considerations apart, is there...

I'd like to hang a gas central heating vertical radiator on a single timber stud behind a thin plasterboard wall. The stud is 38mm wide (actual size) and (presumably, difficult to measure) around 75mm deep. The radiator would weigh around 35kg in total, spread across a number of screws which can...

Looking to get an internal wall removed in my kitchen. This wall runs parallel to my joists. When i took off the frame I noticed that there is OSB under the plasterboard. Why is this? Kitchen cabinets on the other side of the wall so is this likely why? wall is definitely parallel to the...

Can somebody help me understand what my dimmer is capable of please? I've recently ordered an aurora aone 250w smart dimmer (because I'm tired of my smart bulbs becoming inaccessible when people flick the switch, so this way I just use normal dimmable bulbs). The minimum load is 10w, the...

Hi all. Hope this is in the right place. Ive got an interior wall I want to hang a screen on. The combined weight of screen plus arm mount is about 17KG or so. The wall itself appears to be 2 pieces of 12mm plasterboard backed to each other, without a stud nearby (it possibly has those metal...

Does anyone know why my fcu has supply and load as normal and an extra live for load and supply?? Ive had to re install my original fcu because I just can't get it wired properly. I have added a picture.

Hi all, Am going round and round in circles with this and thought its time to ask the experts... We have a new build, and am trying to change the living room light switch to a dimmer, but need advice on the connections. The current switch has two brown wires into the L1 port at the top of...