manrose

  1. A

    Manrose fan (switch off)

    Hello, ive installed a manrose fan with inputs: live, live switched and neutral wires. I looked at other posts to help with that, thank you! I connected the live and live switch via an extra small cable (see thumbnail). While the fan is working, spinning, i am now struggling to make it switch...
  2. B

    Replaced extractor fan, Now bathroom lights don't switch off but dim

    The original fan was ceiling mounted with integral humidistat (Vent Axia Lo carbon). The ducting from the original fan was crushed in the ceiling void and did not work effectively. the fan ran continuously to try unsuccessfully to get the humidy down to the desired level (our bathroom has no...
  3. A

    PIR fan triggered by interference

    The Manrose XF100PIR 4 Inch Toilet Extractor Fan with PIR I fitted in a downstairs loo starts for no reason in the evenings, sometimes three times, sometimes not at all, but usually at least once. Nothing in the room moves (towels, mirrors, gloss paint, all been checked). The isolator switch is...
  4. J

    Shower extractor fan ceiling mounted. Which one is the best

    I have a bathroom in the loft which need a ceiling mounted extractor fan. I`m struggling to set my mind on what I have to buy and install. I came across some inline model which seems very powerfull but not sure how this will be installed under the ceiling and how easy would be to replace in the...
  5. P

    Manrose Remote Humidistat

    Hello, I've recently moved into a house which has a wet room. There's a small window which can be opened quite wide and a small heated towel rail which doesn't get very hot. After using the shower, I always leave the window open for about half and hour and leave the extractor fan running for as...
  6. B

    Manrose MF100Y Extractor Issue

    Hi All, First time poster, long time subscriber. I am currently installing my inline extractor using the wiring from my standard extractor. On the standard extractor (fitted with external isolator and independent switch) the permanent live (brown) wire was terminated and taped up. Using only...
  7. B

    Manrose extractor replaced, doesn't work

    My Manrose XF100LV extractor (was in flat when we bought 4 yrs ago), started to rattle and became quite noisy. Today it died. I bought an identical replacement. Husband fixed it up and wired as before (instructions enclosed seem to apply to several models, none look same as ours). All looks...
Back
Top