metal stud

I wish to build a metal stud wall to partition my loft, there is a loadbearing brick wall I can build upon BUT if built there the ceiling runner ends up centered parallel with the rafters and have nothing to attach to. The best I have come up with is adding some noggins (in red) 600mm apart...

Renovating my en-suite and I wish to add a largish mirror to a wall that will also be tiled. In total though, the weight will slightly exceed the maximum weight for plasterboard i.e. mirror + tiles > 32kg/m sq. As such, i am looking for advice on the best way to strengthen the wall. I don't yet...

Hi, My basment is being professionaly tanked, and I need to install stud walls all around, before insulating/plasterboarding. I'm looking at using 50mm metal studs 400mm apart, with 12.5mm plasterboard (700mm on some walls, but space is an issue, hence wanting 500mm if possible). Some...

Hi, Contractors are completing my basement and tanking it all (Delta Membrane). I am installing metal stud walls to the edges of the room that will be insulated but only plasterboarded on the one side, so I am concerned about the strength/possible felixibility of the wall as it will be approx...

Hi all, hope this is the right place for this.. but I was hoping I could get some help. Im fixing two 5kg shelves (string pocket shelves) to the plasterboard wall in my kitchen. It's a new build flat and as I've found out today - the studs are metal. I wat going to use grip-it fixings for...