mira

Hi, I recently bought a Mira flight safe tray 1000x800 mm that needs to be raised. Are Mira riser kits sturdy or wooden frames are considered to be more solid?

Hi all, Our Mira Select shower (fitted in 2003) has decided to kick the bucket and the dial will no longer turn. After taking off the front cover is seems the plastic clip on the blue cold water side has snapped and we need a new cartridge. I’m cautiously optimistic this is what we need...

Hi our showers slide bar has just jumped off the wall The bottom part is all rusted and I've a horrible feeling this is the remains of the screw stuck in the plug in the wall. Any idea on how I can get the screw out? I've tried pliers but it's not budging

Hello I have an ancient Mira Sport Electric Shower that drips from the shower head when not in use. It drips every ten seconds or so. Not sure if this is diagnosable from photos alone? If it's clearly something simple for a non-DIYer like me to fix then that would be ideal. Otherwise I'll look...

We have inherited a neglected shower in the en-suite with a house we bought recently. Is it possible to replace the manky peeling chrome waste on this Mira shower tray without remove the shower tray? I don't want to try and force it for fear of it coming to pieces and making work for myself...

Hi Has anyone managed to successfully source a replacement for the older Verve, Response, Logik style fixed showerheads or knows of a way of simply converting to allow a newer head to be fitted. Just had new cartridge and refurbed the bathroom - had replaced the head in the past so was...

Hi Folks, Apologies if this has already been asked and answered. I’ve got an Mira advance flex, I live in a very very hard water area. My shower is 2 years old with a Electrolytic filter that’s less then a year. I keep getting very weak flow at higher temperature and sometimes it cuts...

Hi, About 30 months ago, a plumber replaced the Mira 415 cartridge to fix the shower going hot and cold. It fixed the problem but at the time he scratched his head and suggested that the pipework had been installed the wrong way around because the once the new cartridge was fitted, the cold and...

Hi, I had a tradesman out today to try and address a leak from the shower screen and the tray, but since he left (this may be totally unrelated, but too coincidental) the actual shower unit/base is consistently leaking! I don't know whether this was intentional or not, but is this a simple fix...

Hi All Please can any one assist with an issue with a Mira Sport Airboost 9KW electric shower that’s been newly installed however the flow seems much poorer than the old Gainsborough E 8.5kw electric shower it’s replaced. The power supply wiring has been upgraded to 10mm as part of the...

Hi I hope someone can help with this. I have a Mira Platinum shower with a Digital Mixer High Pressure/Combi Valve. For a long time now the shower has not worked, I get a small trickle when I turn it on and if I put one of the hot taps in the bath or sink on full whack then the flow increases...

Hi all, Hoping for some advice in these trying times. I've got a Mira ppt3 power shower pump that has started leaking water. Its very old > 15years. Its located at the end of my bath in near the shower. So I think its replacement time. So I had a good google worked out I needed positive...

I've got a Mira Enthuse electric shower. https://www.google.com/url?sa=t&source=web&rct=j&url=https://www.plumbworld.co.uk/documents/1-mira-enthuse-electric-shower-installation-user-guide.pdf&ved=2ahUKEwji9u-E1ernAhVUQkEAHbChAN4QFjAAegQIAhAB&usg=AOvVaw0vRO5FtnkeEr0Zlw6VpBMW&cshid=1582563695478...

I just noticed my electric shower started leaking cold water a couple days ago. It's a constant drip from the bottom-right of the case. I didn't notice any issues with how it operated, though. I opened it up, and there's generally quite a lot of water droplets (condensation?) on the inside...

I've got a very strange problem with my Mira Sprint 8.5Kw electric shower. The water temperature is way too hot so I try to make it colder by turning down the temperature control and the low pressure light comes on making the water goes tap mains cold. If I turn the temperature control back up...

Hi all Some advice if possible. I fitted a new shower yesterday (Mira ERD Realm) thermostatic type at a clients house. Very pleased with the flow rate BUT it could be hotter. After flushing and commissioning I left the shower to run on full power ( lever turned up completely anti clockwise. I...

We have a combi-fed Mira Excel shower, which has developed a temperature problem. Used to run hot, but now only runs a touch above luke warm. Here are the symptoms- Turning the temperature control on the shower fully to the left (hot) results in a brief moment of full hot water before then...

I have a Mira Event XS Thermostatic that's been (professionally) installed and working perfectly for at least the last 10 years. I'm the only occupant / user, so usage is relatively light. Recently the motor has sounded just slightly different, and the pressure has been possibly slightly lower...

Hi, First post on here, and hoping for some help to sort out a big problem! I have a Mira Sport J89 electric shower, that is constantly dripping from where the shower hose connects. I have taken hose off, and face of shower unit but can't see where it would be coming from or how to fix. See...

Good morning, I've been browsing the numerous threads surrounding the above issue but can't seem to find an answer. So I thought I'd post my specific issue for your advice. I'd be grateful for any thoughts you may have. We moved into our home in February and the shower was working perfectly...