premier elite 48

Hi All. My premier elite alarm has recently started to try and arm itself ( goes into exit mode) whilst it is already in part armed mode overnight. This usually happens at a fixed time however recently it has been a bit more random. I feel there must be some sort of schedule that is causing it...

Hi all, new to this forum, but thought I'd join up, hoping for some assistance. I've just installed a Texecom prem 48. All working ok i think. All with EOL wiring. One 8xp, 16 zones being used. 2 contacts share a zone on each garage door. Other than that everything has independent zones, 7...

Hello My Texecom wireless alarm system has been up and running for 12 months with no issues then over the weekend an alert popped up concerning one of the outside bells. It is telling me there is a 'radio conf fail' and it isn't possible to set the alarm because it comes up with message...

About 12 months ago I fitted a Texecom Premier Elite wireless system. The system commissioned without any problems and walk test was fine. The system consists of 6 PIR's, 4 Dual and 2 Quads. Since then I have had 4 false alarms, all on the Quad PIR's . The first 2 (about 2 months apart was on...

so I installed my texecom 48w into my house a few months ago preogrammed it in and everything has worked perfectly so far. Until today I set up the com ip to get access via my phone etc. After setting up the IP address and setting up the app I went to set the alarm. When I got to set it just...

Hi Have had Texecom Premier Elite fitted for a month now, all working fine with app telling me when system is armed, disarmed and remote UDL started BUT Today I had a false alarm while out and did NOT get an indication on the app - only realised when I got home and external sounder was...

I have installed a Texecom Premier Elite system and its all working fine. I connect to it through the ComWifi unit. I set up the app so that I can receive notifications but every 2 or 3 days the app stops working. I am no longer able to receive notifications or access the keypad through the...

I have just finished installing a Texecom Premier Elite 48 with a ComWifi module. All is working well and I have been using Wintex over the wifi network to set up the various options. Tonight I have been trying to get the IOS App working with no success. I realised that you cant have both...

Hi Experts I have a premier elite 48 panel (v 3.1) fitted with ComWifi on Com2 (working fine) and added the Com2400 directly to 10 pin connector and a speech module to the add-on panel as described in the manuals. Connected the phone line to the RJ11 socket using a ADSL filter from the main BT...