problems

So I am hoping someone can help me with this? We are currently renting our home and the landlord wants to sell it, so we are looking at problems the house has and trying to figure costs etc… to see if it’s worth our time and money. So… the toilet in the bathroom is on a stud wall with the...

So I am hoping someone can help me with this? We are currently renting our home and the landlord wants to sell it, so we are looking at problems the house has and trying to figure costs etc… to see if it’s worth our time and money. So… the toilet in the bathroom is on a stud wall with the...

Hi Guys, i wondered if anyone would be able to shed some light on this problem, i have a Main combi 30HE that i have had for the last 7 years, but just lately the diverter valve stopped working (no movement of either pin) so i got a brand new one along with a new plate heat exchanger, while it...

Hi all, We've had an extension built with 600mm x 600mm floor tiles laid through from the hall into the extension. In the hall, the tiles are laid on a suspended wooden floor with underfloor heating between the joists, chipboard across the joists and Ditra matting. However, the tiles have...

I have a Trianco TRG45 gravity feed boiler. Its been working fine but now goes out regularly!!! It does not boost back up to full burning from slumber. If the boiler has been on slumber due to the water being at temperature when a call for heat is made the burn will not boost up again. A few...

My Salus rt500rf programable thermostat is acting bonkers. Had it working fine for 6 months, now its going crazy. It has been used on its factory settings, 22 degrees, manual and no programed on/off times. In the early hours of the morning, around 3am/4am it ignores the set temp on the unit and...

Hello, I have read many threads relating to similar issues to mine and have checked / tried a lot of the tips, however still am having issues with the switching of the Hot Water Pump. Any help / suggestions would be very much appreciated. Overview of work carried out on system since acquiring...

Hi Folks I have a Miele W820 Washing Machine that's approximately 17 years old and is now not starting it's cycle (ie does not commence filling) on some Program Settings, but is ok on others. The machine starts correctly in the following positions: - In the 'Cottons' programs the 70,80&90 deg...

I've got a brush cutter as above. Some years old now but has been running fine. Stupidly, I left fuel in it for some time while not using it, and inevitably it gave problems. Started fine, and ran OK after a bit of spluttering. Started using it, fine, then after about 20 minutes the revs would...

Make: Creda Model: 79162 Hey All. So these storage heaters are the bane of my life. I noticed one of the storage heaters not working some months ago, I opened it up, realised there was a green component on the thermal combined control (what ever that is) that was heating up really hot, but...