Hi all,
I have an outdoor light which has a titan receiver relay (as in the picture) and this is controlled by a switch indoors as in the pictures. However the receiver has now packed in and I need a new one. I can seem to find that specific receiver anymore so wondering if anyone can recommend...
Hi all
I know there are a number of threads on this, which I've read and attempted to follow.
Short version:
Had an old system boiler for HW and CH replaced with a Logic Max C30 Combi. Previously the system was wired up to a dual channel Hive. The guy that fitted the boiler said it'd need...
I currently have a Polypipe Single Zone Master Unit (PB1ZM) connected to Watts Receiver and Thermostat to control my underfloor heating. The RF Receiver is playing up so going to replace this with a HIVE Active Heating dual channel setup, which will also allow me to replace the Honeywell...
Hi. About 10 years ago I had British gas install their Remote Heating Control hub, receiver and wireless thermostat. All worked very nicely and later they brought out the Hive app so I could use it on the phone. Now they brought out a new Hive and my old system has been discontinued and no...
I’ve just bought the Hive Mini and I’m trying to switch the receivers
My current one is a Honeywell wired up as seen here….
Can some please tell me where exactly each wire goes in the hive receiver as that is marked N L 1234 not NLL ABC
Thank you
Suddenly the thermostat has stopped sending signal to put the heating on.
I’ve tried changing the batteries..
The red light is flashing on the receiver and on auto.
I’ve tried turning everything on and off again .
Its not kicking in when I turn the temperature up on the thermostat the flame...
Hi everyone,
I'm planning to change from Nest to Hive. I've read a few posts already (this one in particular was helpful) and I'm fairly confident I've got it right in my head, but a few things I want to check if you could help.
Bit of background - we moved into a house with a system boiler...
Old Siemens reciever https://i.imgur.com/5nzTFkW.jpg
New Hive https://i.imgur.com/lqLys57.jpg
I wired this up yesterday but no lights came on at all, checked the wiring and it all looks fine, figured it was a faulty receiver but not sure.
One thing I'm thinking is that I know the siemens...
Hi all,
Hopefully you can help me with what seems a simple wiring task.
I have just purchased the Hive kit and am trying to replace the existing Siemens Landis & Staefa RAA02.1N thermostat with the new Hive Receiver.
There are just 2 wires and an earth wired up and it useds the following...
I am replacing my old RF thermostat (Tower RF-205) with a Heatmiser RF-Switch but just wanted confirmation on the wiring. The old thermostat has 4 terminals. Live and Neutral I'm happy with but for some reason they have labelled the other two Out 1 and Out 2.
The new receiver has a ton of...
Hi All newbie so go easy please
I’ve got a focus estate 2007 ex police dog van,
When bought car only came with standard key the car has central locking
I got the a key smith to cut and code/programme a new key and fob but when he tried to sync to the car thru the usual sync method it wouldn’t...
Hi all hoping you guys can help and apologies if I ask any obvious questions or what's been asked before.
I have an ideal conventional boiler with a Honeywell Analog stat, a hot water tank upstairs with a UP2 British gas programmer by the tank.
Bought a Hive 2 and the electrician has replaced...
Hello, complete novice here.. after doing some searching I found an old post which has alerted me to the fact that the problem with my boiler not responding to the salus rt500rf thermostat display monitor is most likely the receiver, as it is displaying the red light (& is therefore receiving...
My Honeywell room thermostat is wall mounted and wireless and on occasion if I wish to over-ride or boost the central heating outside of the normal settings the signal doesn't always seem to be picked up by the boiler. Is the 'receiver' within the boiler? Neither I nor my plumber or electrician...