Hi,
I had 2 GRP dry valleys installed (replacing old style ones) and the tiles seem to have some distance from the middle ridge. My roofer claims they don't need to be flush as long as they are past the inner rivet. Neighbour's roofer disagrees. GRP valley specs/ installation guides are not...
Plumber fitted new boiler recently and the new flue goes through a small pitched ground floor roof.
Is this a bad job or am I being overly critical. Moreover, not sure the use of sealant/mastic under the sheet metal is a long term solution.
Would value some opinions.
Hi all,
I have had a new roof fitted on my house and they roofers have left quite a bit of tile offcuts between the felt and the tiles.
I have attached a photo.
What should / can I do?
Any help much appreciated.
Kind regards,
Mark.
Hi all,
Im new to the forum I hope you can forgive me if I post something in the wrong place.
I hope someone can help me.
My neighbour has had new roof tiles put by a council, and to my eyes the bit where is merging with my roof it just doesnt look right. Their tiles are bigger than mine but the...
Hi all,
Im new to the forum I hope you can forgive me if I post something in the wrong place.
I hope someone can help me.
My neighbour has had new roof tiles put by a council, and to my eyes the bit where is merging with my roof it just doesnt look right. Their tiles are bigger than mine but...
Hi all,
I’m replacing my roof. Attached are my roof tiles. When installing roofer didn’t nailed any of those to battens. Sati that these kind of tiles no need nailing. And in future replacement will be easy.
is that correct? Do we mail it? Bit confused.
I'm not sure where I can buy roof slates?
If I get them would I need to cut to size?
Is it better to just get a roofer to do it?
It's only a ground floor annex, these things fall off from time to time so it may be a good skill to learn.
Thanks for any help you can give me
Hi hoping someone can advise! I had a few tiles replaced recently but concerned they are not sitting properly flush. The roofer said they are the same but made from clay (not concrete as original ones are). I know they were tricky to find. Can anyone tell me whether these look ok?? Thanks so...
I have a small section of the wall where I need to fix hanging tiles (red clay Victorian tiles). There are no battens and the other tiles are fixed with nails going into the brick. I can’t find any nails that can penetrate the brick and hold the tiles , i tried different types and size. Is there...
Hi
I read somewhere that all original roofs on Victorian houses were slate, does anyone know if this is true? My current one has clay tile (Rosemary I've been told) and I'm sure the roof had to have been replaced at least once in its life. I am thinking of replacing it again.
I'm very...
Has anyone ever seen Spanish/French barrel tiles used in the UK for roofing? Seems a nice style but have never seen it used in this country and wondering why? Is it just not the fashion trends or is there something more serious regarding the materials, weather, etc?
Images of tiles (sold at...
We just had our roof completely renewed from the boarding outwards, including re-tiling with marley roman roof tiles.
I noticed, especially in the valleys, some big gaps between tiles not resting on the grove of the adjacent tile. You'll see on the photos a couple of these tiles where I can put...
I live in a 1900s terraced style house, it is joined back to back as opposed to having neighbours either side, meaning it has two gable walls.
The house is a peculiar shape and on the right hand side it widens towards the back, from a Birdseye view it forms a trapezium. The roof features Roman...
Hi, I live in 1920's terraced house with gable roof.
I've just finished reproofing the back of my house (garden side) using the mix old plain concrete tiles (cleaned thoroughly) and lots of new ones as well. I've used old tiles purely due to lack of funds and also Covid closures meant...
Hi
I've got a lean-to roof which has cover width of 8.42 double roman tiles. Am I OK to cut tiles and drill a new fixing hole? I will will try and ensure one of the humps is on the outer edge of the roof. I've got some verge clips which I hope will support it a bit, perhaps some epoxy resin too...
Hi
I had a nightmare project, a extension on my house. The roofer which I hired i had lost a little faith and was working alongside side him to keep an eye out. My concern is the method he chose to butt up against my house with Conrod plain tile, he used a dry soaker, but there are gaps between...
Hi everyone just went up on my loft space and found out that the roof tiles have no felt underlay or felt sarking, is this a major problem I recently brought the house it was picked up in the survey that there was no undertile felt, from what I have read a lot of houses built in 1930s don’t have...
Hi
I am new to this forum stuff so hoping i do it right and someone can help.
We installed a couple of velux, and have tried to tile round it but the tiles kick up an awful lot around the window, esp at the bottom. Is this right? Velux advised us to use the edj flashing kit but all the pics i...
Hi all,
Just after some general advice about an extension to our existing pitched roof. I attach a plan for reference (apologies for the sketchy scrawl!). The boundary of the existing pitched roof is demarcated by the blue dots. There is also an existing flat roof (single storey only)...
Hi,
I've read quite a few posts about similar issues to mine, so apologies for duplication.
We have completed an house extension that has a 15 degree pitch roof using sandtoft roof tiles. There are 4 velux windows and the roofer has used the correct EDW flashing kit, according to Velux. I am...