sleeper

I've read the other sleeper threads on here and, given my site intall have settled on using i-beams and horizontal 3m "tall" sleepers, similar to this thread: https://www.diynot.com/diy/threads/retaining-wall-questions-sleeper-design.502344/#post-4144197 My new next door neighbour is very...

Hi I am in the middle of renovating my garden. I am levelling the sloped ground by building up with mot 1 in places and digging out in others. There will be a step up from the patio onto the garden by using a single tier sleeper step across the width of the garden. My question is will these...

Hi My first post. I am building a pond using sleepers and want to put a pond window in. The window will need a 10cm by 1cm depth x 100cm long rebate in middle of the sleeper . I was wondering what sort of tool would be best to do this. thanks,Shumit

Hey there, So I'm in the process of creating a play area for our children. So far, I've removed the top grass from an area of ~6m x 3.5m. I'm planning on taking this down about 30mm so that I can put down a weed fabric, and then put down ~50mm of Rubber mulch as a surface. I'd like to edge...

Hi Our beach hut is on 2 large sleepers. Unfortunately they are rotten. How can i repalce them ideally without destroying the hut. Or does anyone have any better ideas? Any help would be massively appreciated

.

Hi Guys, I was wondering if someone would be able to give me some advice. So I'm redoing my driveway, with the aim to gravel it with some gravel stabilised grids. I'm halfway through compacting the Mot type 1 primary sub base. The drive way is on a a slightly gradient and runs away from...

Howdy, The missus has somehow talked me into putting down some sleepers in the garden to create some raised beds. I will be using 20x10x180cm untreated oak sleepers and the soil is extremely heavy clay and slightly sloped along the length of the beds. I need some advice on the best way to lay...