soil pipe toilet

Having a bit of an issue with mice at the minute in a new house, so trying to block all gaps and paths in. I have noticed that there is a sizeable gap around an en suite toilet soil pipe on the first floor, and was wondering what would be some suggestions on how best to block it, with keeping...

Hello, we are having some groundworks done and have noticed that where the concrete has been partially removed around the bottom of the soil pipe (from toilet etc), it has exposed a gap at the end of the plastic pipe which is leaking - it looks maybe like the collar on the lower clay pipe has...

Hi All, I'm re-doing the downstairs toilet. So far I've: Ripped out the old toilet suite and sink. Re-routed the CH feed and return from upstairs to come through the garage and through the back wall of the toilet - and I'm going to bury them in the screed (boxed in access for the joints -...

Hi, Our toilet started leaking at the pan connector a few weeks ago so I replaced this part myself thinking it was a simple enough job... When dismantling the toilet & old connector I discovered that an extender was pushed inside the soil pipe which I thought was odd as the standard pan...

Hi, please forgive the newbie question: Will a standard McAlpine Flexible WC Pan connector like this... ... fit directly into a ring seal connector.... and/or a solvent weld connector.... ...on a standard 110mm soil pipe? Or would I need to insert a cut piece of pipe inside each...

Hi all, It feels like I’m asking questions daily at the moment! I’ve got two new en-suites going in next to each other either side of a brick wall. I have access to one internal stack running up the dividing wall. Hopefully this sketch makes sense: My idea is to fit a triple branch (see...

Hello, I am looking at splitting my bathroom into 2 (2nd floor flat) In order to do that I would: 1) Need to add a second toilet 2) Need to reposition toilet and soil pipe. I am getting a plumber out - but I wonder if it is principle possible to do the configuration as per drawing. Thanks...