solvent weld

Hi all, Got an old 60s/70s PVC soil stack, the pipe socket (which is partly painted pink in the photo) is Hunter branded and has an old O-ring design quite different to modern stuff. I tried to revive the o-ring with some grease and ran a short length of new grey PVC pipe into it, then have a...

I need to attach to existing pipe in the floor and then come up behind bathroom units, which only afford 50mm of clearance. The attached picture is my first attempt, which is not permanent as the connection in the floor has been done using compression. I spent ages lining everything up and...

I have Floplast waste pipe and need to feed into the soilstack. Due to space restrictions (internal wall built over the top!) it will be easier to use an offset reducer, but Floplast only manufacture (solvent weld) reducers with the entry point in the centre. Obviously other manufacturers do...

Right next to my shower tray there is a 110 mm soil pipe and i need to feed-in the 40mm waste pipe. Being in a recess, once it is connected up it is virtually inaccessible without taking the tray back out again. :-/ My question relates to the best type of reducer to go with i.e. solvent weld or...

With reference to the photos, I have solvent weld pipe coming out of the floor and need to adjust it as it is too far from the wall and will foul on the new units. Previously, they just hacked the units to get the pipework to fit! First question is whether I should just move the pipe and bring...

I did my basins 32mm waste pipe earlier, 3 solvent weld joints. The pot said wait 15 mins before handling, nothing about testing. I just ran some water down it with a hose, about 1.5 hrs/2 hrs after doing the pipes. Is this enough? The internet says lots of different stuff, some saying 24...

I have this at home: Glue and I need to solvent-weld these abs drain piping: pipe and elbow Can I avoid purchasing solvent cement? Or would that present some problem? Thanks.

Planning a new bathroom, can anyone see any issues with this waste water design? I plan on using 50mm solvent weld pipe and can achieve the correct fall from each appliance to the soil pipe. I already purchased the basin that came with a waste trap, I am not sure if it is anti-vac or not so...