steel lintel

We are considering replacing a bearer supporting one side of a bedroom floor. Yes I know that we will have to engage a structural engineer for formal calculations etc., but for now, I just want to get an idea of practicalities, sizes etc.. A builder has suggested using hollow rectangular steel...

Hi I currently have a small extension which is accessed via an opening in the side of the house with a span of 2.4m. I will be taking this small extension down and building a bigger extension in its place. I am going to stud and board the opening although i'm not sure how to protect the...

Hi, I recently purchased some HSS steel bits to drill three holes into a kitchen column so that I can put a TV stand onto the wall. This is the TV stand: Ibra Flat TV Mount This is the TV: Samsung 32 Inch After drilling smaller pilot holes (Slow with WD40) into the wall I found that it was...

Hi All, I want to put a downstairs wall back in that has previously been taken out, to fill the 2.4m x 2.4m alcove space. After a bit of exploration and chipping out of plaster, I've found that the wall on one side is brick, the other is timber, the ceiling is a steel lintel, and the floor is...