substrate

  1. ajmetro

    Self levelling compound over polyethylene paint

    Hello everyone, There is no mention specifically about SLC over polyethylene paints. The general consensus of leveling over paint is a no no as the adhesion is not there. I have a large area of floor that needs levelling out slightly to get rid of the ridges in the laid concrete. The concrete...
  2. A

    Best substrate for half height tiling

    Hi everyone. I'm about to embark on a complete bathroom refit (very small bathroom approx. 3.2sqm) that will have a corner shower with full height tiling in 8mm porcelain tiles (approx 100mm across). The remainder of the room will be 9mm porcelain hexagon tiles (approx. 250mm across) up to a...
  3. derekphl

    Plastering on blown substrate

    I've been working on a room where I removed the chimney breast and various bits and pieces. Having attached insulation backed board to one wall, over-boarded the ceiling and stripped the wallpaper off the remaining walls I have now started to plaster skim each surface. Yesterday I did my first...
Back
Top