texecom smartcom

  1. O

    Texecom Cloud / SmartCom / ComGSM - No notifications

    Hi all, I had our Texecom Elite 48 working with SmartCom and we were getting notifications in the Texecom app, butr after adding ComGSM we're not getting any notifications via the Texecom App nor via SMS. I know both are working as I can connect to the panel both via SmartCom and also sending...
  2. dkalaan

    Texecom Smartcom Cloud LED not Stabilising

    I have a Premier Elite 168 Panel on v6.02 and a Smartcom on V3.03. My Cloud LED light fails to stabilise, im being able to generate an app code from my panel but whenever I try using that app code on Texecom Connect V1 or V2 or Texecom Cloud it doesn't work. I've sent my texecom smartcom to...
  3. S

    Texecom Smartcom disconnections require unplugging/plugging ethernet cable

    I have a Texecom Premier Elite and SmartCom alarm system. I keep getting issues with access via the app failing, and the alarm installers haven't been super helpful, so I thought I'd see if I could get some clues here. The SmartCom (CEL-0001, Hardware Revision 26 if that helps) is connected to...
  4. N

    Texecom Smartcom app not working

    Hi sorry for a longer post, just trying to give as much detail as possible. I have recently moved into a house with a Texecom Elite 48 alarm ('menu - 4' shows sw v5.01.02.LS1) with a smartcom module installed. Over the past week or so I have been investigating the configuration of the alarm...
  5. P

    Texecom Smartcom

    My wifi provider was changed, so I am trying to connect my Smartcom to the new Wifi Connection so that I can reconnect my app. However, I am getting a “no internet connection” message (as seen on the screenshot below) when I’m trying to connect to Smartcom. I am unable to connect to the...
  6. I

    Texecom Premier Elite with Smart Com

    Hello All, Have been a lurker on this forum since I bought the premier elite alarm panel and have had some useful insights along with the texecom manuals. I have managed to setup all the zones and areas on the alarm and have successfully fitted the sensors , panel (5.04.02 Version) and a smart...
  7. B

    Texecom Smartcom Setup Issues

    Hi All, Starting a new thread after reading people experiencing similar issues to those described here: https://www.diynot.com/diy/threads/texecom-connect-smartcom-problem.523131/page-2#post-4629270 After some building works which included powering off the texecom for a couple of months and...
Back
Top