thermostatic

Hi Please can anyone advise on the tool needed to remove this shower valve? TIA Mick

Hi, I've just changed from a EPH thermostat system to Hive, just wondering if anyone could help in matching the wires up for me, are they installed correctly? I've attached 2 photos showing the change I've done between them, thanks

Any tips on how to remove the retaining ring from my Burlington shower so I can clean the thermostatic cartridge? It has two notches. Thanks!

Hi there, very new to the forum. Seen some very helpful information floating around on here, however I think I need more specific help if possible. Dropped some pictures below of exactly where the water seems to be coming from. The nut which tightens to bar part of the shower, this is the...

Hi Come someone please help. We recently moved into a old house with 2 X 80s shower room upstairs and a newish shower room downstairs, with a Thermostatic shower that's always been on the hot side and control valve not even turning a quarter of the way. This week we started combining the 2...

Hello, I hope everyone is well. I am having some issues with my Creda Digimix Shower. It works but it is not reaching the correct temperature. For example, the range is 1-9 with a L and H setting. The normal range has always been 5/6 and this produces hot water. However, recently any setting...

After I flushed my system recently and replaced a couple of the TRVs, I struggled to re-balance it. There were 2 rads which wouldn't warm up for ages after the rest. I had been unaware that my system would need re balancing. There must have been some serious crud in the pipes. I learned on this...

Hi All We have an old Mira Excel Thermostatic Shower (pre-2003 - no lever) running off pumped hot and cold supply. All was fine until I upgraded the pump from 2.0 to 2.5 bar. Now it gets no warmer from position 3-7 on the dial. Can I reset the pressure on the existing cartridge, or do I need to...

Hi, please can anyone offer any help. I've just had a number of radiators fitted as part of a large extension. I've gone from 8 to 14. All the radiators in the house bar the bathrooms have therostatic valves. Obviously some brand new and the older ones, well, old. My old heating system was...

I don't need a gas fire as I have a lovely log burner, but was just wondering how many gas fires on the market support conventional hard wired thermostats as in the type you use with central heating systems? All of the gas fires I have had a previous places I have lived have been very basic...

Your average TRV works by sensing the radiator water temperature (it's bolted to it, after all) and I need something that actually senses the room temperature, to respond to opening the door and whether or not the woodburner is alight. I don't want to go to the bother of Zones. What I think I...

Hi, I currently have a british gas installed/branded thermostatic controller and wireless receiver. This is the wireless receiver: http://i564.photobucket.com/albums/ss83/al222b/KNB1530/P1013688a_zps1b63a57e.jpg I want to upgrade the controller, so that I can set different timings for...

Hello all I have searched these forums and youtube etc but cannot find anything.. Background: Shower is luke warm (HW to other places is fine) Shower is about 8 years old and we live in a hard water area so I think thermostatic cartridge may be crudded, Can't identify the exact shower type but...