timber frame

Hi all, I'm looking to replace the bottom section of this wooden window frame illustrated in the pic. It would guess that that each section of 4 panes has been fitted within the larger frame. I want to remove the left hand section of 4 panes for ease of repair. The question is, does anyone know...

I've drawn up plans for a 700mm wide decking path using timber joists, decking blocks etc etc, but I feel like I'm massively over complicating it. I also want it to be flush with the grass level, so I'll need to excavate a whole lot of soil. In these photos, I can see the guy has used some kind...

Hi, I recently bought a Mira flight safe tray 1000x800 mm that needs to be raised. Are Mira riser kits sturdy or wooden frames are considered to be more solid?

Hello All, I am planning to convert a detached, 1960's, brick-built (singe-skin with piers) garage with a pitched, tiled roof into a new kitchen-diner and connect it to the existing house with a nice walkway with plenty of glass. The garage is approximately 3.5x6.0m. I am planning to construct...

No longer required thank you for replies

We are considering adding a timber frame extension at the back of our house, which would fill what is currently an "alley" between the back wall and a raised patio (image below is midway through some landscaping we had done last year): I have scoured these forums and others to see if what I...

Hi Guys, Looking at the attached plan... with the joists running left to right.... which joist size would be suitable: 1) 8x2 2) 8x3 3) 9x3 The internal walls are solid block and load bearing

So I have started my workshop build today... Finally! I am knocking down my current garage to make way for a double story side extension on my house so need the workshop to house all my tools and junk. (See...

Hello, if building a shed/garden office directly on a raised concrete base the perfect size do I need to allow bearers underneath the shed or will I be ok as my membrane will overlap my concrete? Cheers

I have to convert my roof from hip to gable and builder advise to make the wall in timber instead of block work as this would be lighter and avoid issue of sticking the insulated plasterboard on the internal side which is very expensive. I came across this detail which was discussed many years...

Hi all, After years of hanging around this site, I finally have a big enough project of my own to share. I am building a garden room (yes... it's another garden room post) with a view to discovering if I can learn enough skills to eventually build my own timber frame house extension (which I...

Hi looking for advice on dealing with the 2.5m height restriction on a outbuilding. I am building a garden office 4x2 stick frame. I am looking at installing french doors (2400mm wide) and I underestimated the Size of the vertical header plate required. If I go for a 8x2 vertical header...

Timber frame seems to be getting ground and is or will be very soon the most popular construction method in this country. In Scandinavia and the US it is already the case. Still, frankly, I have my doubts. Yet, being a rational person I wonder if there is a rational reason to say that frame...

I've got a double garage at the rear of my property and I'm looking to attach a new "Shed" to the back of it. I've already laid a 4x3m 9 inch concrete slab with DPM but I'm undecided on how to proceed. My choices have boiled down to the following and I'm keen to hear peoples opinions. Timber...

Hey all... I'm in the process of designing a new garden office to replace an existing T&G Log cabin that's had it's time... The office footprint is going to be 4.8m wide x 4.2m deep, and will come in under the 2.5m height for permitted development. I'm intending to add a small kitchenette...

I have a wooden window frame, I think it is an old softwood type casement window where the glass is putty pointed from the outside into the frame. Due to condensation over the years the bottom part of the frame from the inside is slightly rotting away because the condensation trickles down the...

When you bead a single pane window from the outside, do you bead tight to the glass or do you leave a gap and fill will putty?

What type of putty do I use for a single glaze glass and double glazed glass? I note there are different type e.g. linseed oil putty and butyl putty? How long do you have to leave it before you can paint or stain over it? Any decent brands recommended?

About to wrap my timber framed garden office with the breathable membrane and battens but am unsure how the edge detail is finished with an EPDM roof. The cold roof rafters end flush with the stud wall rather than any overhang. If I go by the limited diagrams seen so far (see attached), then...

Hi there. I've had some very helpful advice from this forum recently, but need some more if possible. Just wanted to confirm the insulation specs. The plan is currently; Floor 75mm PIR insulation laid directly on concrete with glued battens spanning front to back as a fix for scaffold...