warped

I have an old pine door that is warped on the handle end of the door so that when closed to the frame, the top and bottom sit to the frame and the middle is about 10mm from the frame, therefore making it impossible to close (the hinge end of the door is perfectly straight. It's been like this...

Hi I have had a new stable door fitted however the bottom door is warped and when shut has a gap of appox 7 mm at the bottom. When the bottom door is locked it pulls the door straight. therefore when shut but not locked there is a dad draft. The company that installed it is saying this is how...

Hi all, been busy building a decking and I received all the materials for the frame four weeks ago. The joists have been stored outside on their sides on some brick footers. Made some progress at the beginning then had to stand still for a while; thus out of the ten 4.8metres 120*47 joists I...

I ripped out and replaced old bathroom recently, including fitting a new acrylic bath with mixer bar shower over it. After fitting the bath, I noticed that the water is pooling on the side of the bath against the tiled wall. Checked the levels of the bath and it's level all around. But you can...