wbp

I am having a plated underfloor heating system installed between the joists of my suspended timber floor throughout the house, so, I was wondering what the best subfloor type is to lay over the joists when the UFH has been installed. So the floor joists are at roughly 450mm centres which is...

I want to replace all the floorboards in my bathroom with 18mm plywood. My local merchants sells 2 types WBP and softwood structural ply. The WBP is described as not being for structural use but would seem to be the better option for the bathroom being WBP where as the structural plywood says...

Hi, I'm in the middle of renovating my property it's got three levels; ground floor, first floor and then loft conversion on the top. I'm at the stage where the building is water tight and I've got all the partitions up on the three floors. I am thinking to put the floors in next - Tounge...

After much deliberation, I decided to clad my garden studio in ply sheets and some cedar as an added feature. I will cut the ply sheets so they have a shadow gap between each one so will definitely need to treat the edges properly which will be exposed. I want to stain the ply a dark...

Not sure if this is the best forum for this query, but hope someone can advise. After much deliberation, I decided to clad my garden studio in ply sheets and some cedar as an added feature. I will cut the ply sheets so they have a shadow gap between each one so will definitely need to treat...

I know this gets asked a lot but I couldn't find a thread discussing the exact points I'm confused about. I'm refurbing a small (1.4 x 2.4m) shower room. The fitter has proposed the following for the subfloor: - 18mm moisture resistant chipboard screwed to the joists at 250mm centres, with...