wet room

I had a wetroom fitted three years ago as part of a full refurb that has leaked on and off ever since. It was professionally installed and tanked. The contractor has come back and siliconed the interface between the tiles and the shower tray waste multiple times but this doesn't fix the problem...

Hi all, After some advice please.... I'm a ex tiler and I am currently building a house for me and my family. I have 2 en suites and a bathroom that are currently at the studwork / blockwork stage. During my relatively short time as a tiler I did not actually have to prepare any walls from this...

Hi all I am wanting to convert our downstairs bathroom (previous owners had council conversion due to immobility) back to a utility room. It has a kind of wet room floor and a large double shower tray that was in a walk in shower. The shower has been removed and for a quick fix we had our...

Hey there, We're currently in the planning stages of our dormer loft conversion project which will form a new master bedroom and ensuite. Ensuite is looking to be about 1.8m wide by 2.6m long, with the shower running width ways on the external wall. Currently, I'm planning on using an Abacus...

Hi All, Just finishing my wet room. I have a linear drain in the end embedded and secured levelled into the concrete floor. I am now ready to do the wet room slope pan. I have placed two pieces of strip wood on each side and raised them accordingly to my slope measurements. I will use these...

So I made a wet room. Half is wet - freestanding bath and shower, half has vanity unit toilet and, for arguments sake, is dry. I tanked the wet side - acrylic primer tanking strips tanking liquid before tiling. When tanking, i painted the primer and liquid 200-300mm into the dry half. Imagine a...

Hi, Guys would like your advice and opinions please concerning my wetroom renovations. I have stripped the walls back to bare brick and removed the previous concrete screed. Sadly, the previous screen was done by someone who didn't slope it correctly allowing water to flow out of the wetroom...

I'm remodelling the bathroom (smallish 2m x 1.7) as a wetroom. I'm replacing the whole floor: 24mm ply, 6mm tile backer board, electrical underfloor heating, self levelling stuff, 10mm porcelain tiles (300x 600). I may be able to lay the whole ply board (apart from the tray former) as one piece...

Hi guys, 8 years ago had an inexperienced friend of a friend who tiles my bathroom flooring in an attempt to fix the shower floor, the water sadly would slope outwards into the stair landing area, it is a wet room. Problem is I would like to remove these tiles, but re-concrete the floor with...

Moved into the property 18 months ago now, and rapidly going through a refurbishment, next the shower-room. Going to put up some of those bathroom cladding panels down to where the altro flooring rides up, but the floor looks very tired, i wondered if to change it I would have to lift it, or...

Hello, I am building a frame for "wet room / shower enclosure" kind thing, made of construction C16 timber frame. At the bottom, my shower tray has to be raised, therefore i will have a step, which will have to be tiled, possibly using long splash wall as the rest of the bathroom rather than...