Hello there, I have recently purchased a Countax C800H 4x4 mower with known issues. The main problem Is that the electric deck lift is broken. I have checked the lifting ram by applying 12v to the correct pins in the plug and can get it to lift and lower by changing polarity. Have just fitted a £100 new Deck height module Of which made no change to the problem, still doesn't move with the dial on the dash. Now the dial is £200 for some reason as it's only a tiny part. Is it likely that it's the dial at fault? Can it be tested in any way?
2009 Countax C800H 4x4 Deck lift problems.
- Thread starter ademco
- Start date
Don't know if this is any help
Have a look at the circuit board behind the dash and inspect for any burnt components - and there is a fuse or two.
Hell of a bit of kit, this one!
John
Hell of a bit of kit, this one!
John
- Joined
- 5 May 2022
- Messages
- 1
- Reaction score
- 0
- Country
Hi, did you get a solution to to this as I have the same problem with my 800 deck?
And can I ask which pins responded to the actuator 12v test?
Thank you. COLIN
And can I ask which pins responded to the actuator 12v test?
Thank you. COLIN