Hi there,
Looking for some help please!
I've installed an Accenta mini G4 alarm.
With just 2 x PIR sensors (No door contacts on the system).
PIR1 (Timed entry/exit) is on zone 1.
PIR2 is zone 3 (immediate alarm).
It's working great just one trivial issue.
PIR1 is facing the Keypad, so when I set the alarm I am getting "Setting Fault" as the PIR is detecting movement.
Not really an issue, as once you leave (ignore the setting fault) the alarm sets as normal.
Just wondering if there is setting to bypass this setting fault ? Doesn't seem to be in the engineers manual, I've tried a few different settings and putting PIR1 on a different zone.
Cheers for any help
Looking for some help please!
I've installed an Accenta mini G4 alarm.
With just 2 x PIR sensors (No door contacts on the system).
PIR1 (Timed entry/exit) is on zone 1.
PIR2 is zone 3 (immediate alarm).
It's working great just one trivial issue.
PIR1 is facing the Keypad, so when I set the alarm I am getting "Setting Fault" as the PIR is detecting movement.
Not really an issue, as once you leave (ignore the setting fault) the alarm sets as normal.
Just wondering if there is setting to bypass this setting fault ? Doesn't seem to be in the engineers manual, I've tried a few different settings and putting PIR1 on a different zone.
Cheers for any help
