Hello, I am attempting to adjust a shower door that strikes the bottom of the frame and must be forced to close. There is an adjustment bar at the top of the door, but the screws are somewhat obscured by the top frame:
There is a screw that connects the top frame to the door, and this can be removed as shown in the photograph. However, the doors are still being obstructed at the top frame:
I thought perhaps the top frame could be removed to release the doors, but it is screwed in from a somewhat inaccessible side of the frame:
Any ideas on how these doors could be adjusted?
There is a screw that connects the top frame to the door, and this can be removed as shown in the photograph. However, the doors are still being obstructed at the top frame:
I thought perhaps the top frame could be removed to release the doors, but it is screwed in from a somewhat inaccessible side of the frame:
Any ideas on how these doors could be adjusted?