I have put together some IKEA wardrobes and would like to box them in to create a built-in look.
I plan to use MDF around the cupboards which will then be painted to match the doors, however I am unsure of the best way to create the framing structure around the wardrobes which I will fix the MDF too.
Here is a picture of the current wardrobes and two options of how to do the framing...
Option A consists of multiple little batons screwed in from the cupboard side and maybe also glued to the walls/ceiling. The finished MDF will then be screwed or glued into these little batons.
Option B uses smaller wood but covers the full width and length of the space.
Any advice welcome on the best way of doing it and open to other options too
I plan to use MDF around the cupboards which will then be painted to match the doors, however I am unsure of the best way to create the framing structure around the wardrobes which I will fix the MDF too.
Here is a picture of the current wardrobes and two options of how to do the framing...
Option A consists of multiple little batons screwed in from the cupboard side and maybe also glued to the walls/ceiling. The finished MDF will then be screwed or glued into these little batons.
Option B uses smaller wood but covers the full width and length of the space.
Any advice welcome on the best way of doing it and open to other options too
