ADVICE please on O ring set, Ferroli boiler ??

[bilabonic]

Hi All

I have a CRAPPY Ferroli Domicompact F24B boiler.

Can anyone confirm this is the correct O ring set i need for the 4 pipes help in by cheapy clips on the Secondary Heat Exchanger ?

Its on page 32, labelled no. 277 -

http://www.ferroli.co.uk/wp-content/uploads/brochures/archives/DOMIcompact F24 B Manual.pdf

Can ANYONE comfirm this is the seal set i need -

FERROLI F24B O Ring Kit 39817620 BRAND NEW ORIGINAL BOXED PART | eBay

Cheers....

p.s I WILL BE GETTING MY GAS SAFE MATE OUT TO CHECK ALL OVER ETC !!!!

 

[ollski]

it looks right. clips are usually corroded too though.

 

[Madrab]

Your gas safe mate will be able to confirm the part numbers and source the bits easily I'm sure but need to be careful as the clips may be irreplaceable, don't think you can get them anymore.

 

[bilabonic]

Cheers guys, lucky i asked, he emailed Ferroli direct and they stated you would have to purchase TWO SETS !!! So 20 washers but you only need 4 !!

He spoke to another Eng who fit's Ferroli's and i had this -

http://img.photobucket.com/albums/v662/romanski/O Rings_zpsisrovjbu.jpg








Handy bit of info...

 

[bilabonic]

Photobucket !!!! Waht a pile of ****e, can not even host a .img file ??? If i goto EDIT on this post the pic shows...?

 

[bilabonic]

Your gas safe mate will be able to confirm the part numbers and source the bits easily I'm sure but need to be careful as the clips may be irreplaceable, don't think you can get them anymore.

Small - https://www.ebay.co.uk/sch/i.html?_...TRC0.H0.X39840380.TRS0&_nkw=39840380&_sacat=0

Large - 39840260