Aggregate and concrete slab for garage - HELP

Joined
19 Feb 2016
Messages
47
Reaction score
0
Country
United Kingdom
Hi _looking for some advice - we employed a groundworks company to take up our existing shed base 10x12 and lay a new base 17x13 150mm depth for a concrete garage installation.
On trying to break up the concrete shed base the contractor said it was proving to difficult so he would use it as the aggregate and has since marked an area of the new base incorporating the existing concrete slab - He has filled this area with stones and packed it down-to pout the new concrete over the top - however - all i can see are loads of stone as edging - it reminds me of how stones are pushed against a railway line and then when the concrete is poured these stones i guess will still be visible. I was expecting to see a 150mm of slab 9maybe some higher slab to compensate for the difference in height in the garden but I wasn't expecting my finished garage to have a layer of visible stones all around it. I was expecting a nice neat edge of concrete not a slope of stones - the ground worker said he can remove the slope so its more vertical - but I just wanted to check that having the aggregrate above ground is okay _ aside from the fact that it will look ugly!
Hoping someone has some experience in this. Thanks
 
Back
Top