Anyone know supplier for galvanised flashing 40mm x 40mm x 1mm x 2200mm ?

[kez1]

Need galvanised flashing for bottom of garage door.
Top picture shows what's needed.
Bottom picture shows what was there and has been taken off. Taken off is 'Dexian 140' x 2200mm, but it's rotted.
I've phoned every local supplier I can think of looking for this. I was helpfully told by one that what I was looking for is called flashing not angled galvanised steel.

Thanks

 

[Burnerman]

I get all of my materials from Metals Supermarkets......they do galv, angle, aluminium, stainless - all sorts.
Your Dexion would have lasted quite well - even longer if it had a coat of zinc rich paint!
John

 

[Notch7]

https://www.ebay.co.uk/itm/GALVANIS...hash=item3f980082e9:m:mMqa60GzaSEjE9p5XTAjYRQ

 

[datarebal]

I use a local sheet metal engineering company to fabricate alloy and stainless steel bits to fit perfectly.. Not that expensive.

 

[kez1]

I use a local sheet metal engineering company to fabricate alloy and stainless steel bits to fit perfectly.. Not that expensive.

I used a local sheet metal company. I forgot I knew them, so long since i've been in there. They cut quality stainless and folded it. Quick cheap and friendly service.