Hi folks,
Just wondering if I could get a little advice before going down the wrong rabbithole. We have an Aqualisa Digital Visage shower, about 2.5 years old. Just in case it matters, it had a faulty power board/supply replaced about a year ago as it was not turning on on a warm day.
Recently, it's been unable to regulate temperature. Set it to a normal shower temp, it will get to that temperature, then go hotter or colder and cycle between too hot or too cold and may never settle. If it does settle at the correct temperature, it only stays there for a minute then starts to fluctuate again.
It's fed from a combi gas boiler, which hasn't changed or been adjusted recently. It's been mild here so I doubt it's an environmental thing.
Wondering do I call a plumber or Aqualisa? I'd imagine it's a problem with the digital processor again, but since Aqualisa are expensive for service support I thought I'd ask in case it may be something else.
Any ideas?
Thanks,
Baps.
Just wondering if I could get a little advice before going down the wrong rabbithole. We have an Aqualisa Digital Visage shower, about 2.5 years old. Just in case it matters, it had a faulty power board/supply replaced about a year ago as it was not turning on on a warm day.
Recently, it's been unable to regulate temperature. Set it to a normal shower temp, it will get to that temperature, then go hotter or colder and cycle between too hot or too cold and may never settle. If it does settle at the correct temperature, it only stays there for a minute then starts to fluctuate again.
It's fed from a combi gas boiler, which hasn't changed or been adjusted recently. It's been mild here so I doubt it's an environmental thing.
Wondering do I call a plumber or Aqualisa? I'd imagine it's a problem with the digital processor again, but since Aqualisa are expensive for service support I thought I'd ask in case it may be something else.
Any ideas?
Thanks,
Baps.