Arcade machine build
- Thread starter magico
- Start date
I haven't tried it myself, but I know there is quite a community building these type of machines using Raspberry Pi's
You could try the following for a start:
https://www.raspberrypi.org/blog/build-an-arcade-cabinet-hackspace-35/
Or there are ready made kit packs:
https://thepihut.com/products/adafruit-raspberry-pi-arcade-cabinet-pack?variant=12364062654526
Or:
https://shop.pimoroni.com/products/picade?variant=29210087489619
I hope that helps?
You could try the following for a start:
https://www.raspberrypi.org/blog/build-an-arcade-cabinet-hackspace-35/
Or there are ready made kit packs:
https://thepihut.com/products/adafruit-raspberry-pi-arcade-cabinet-pack?variant=12364062654526
Or:
https://shop.pimoroni.com/products/picade?variant=29210087489619
I hope that helps?
I am planning to build one when I move into my new place. Mine will be a full size standing one.
I found a UK site that builds them but I can't remember the address any more. I think it was bitcade but they seem to have less DIY kits now - they are more focused on pre-built that are really expensive.
Arcadeworld does kits specific for wall mounting:
https://www.arcadeworlduk.com/categories/arcade-flat-pack-kits/wall-mounted-kits.html
I found a UK site that builds them but I can't remember the address any more. I think it was bitcade but they seem to have less DIY kits now - they are more focused on pre-built that are really expensive.
Arcadeworld does kits specific for wall mounting:
https://www.arcadeworlduk.com/categories/arcade-flat-pack-kits/wall-mounted-kits.html