Australian Light Switches

[EricTheViking]

I would like to change my old one-way switch to a new two-way switch. The old switch has currently only two wires connected to it, one red and one black wire (there is no earth wire). The new switches have four connectors named; C (Common), 1, 2 and Loop. Can any body tell me how to wire this up with the new switches so I can turn the hall light on and off at both switches.

Many Thanks
EricTheViking (Australia)

 

[breezer]

you need to have another cable form one switch to the other, but i also ask you read this