Awning fixing recommendation for new build house

d_d · 26 Jun 2024

Hi all,

I am planning to fit a 3.5m retractable awning (23KG) above french doors to the rear of a new build house.
But I am unsure whether the supplied anchors are suitable for new build properties since I understand modern bricks are not necessarily solid inside?
(A link to suitable fixings from B&Q/Screwfix/Wickes/etc would be ideal.)

The awning is similar to this - https://www.shopgardendecoration.co...window-door-sun-weather-shade-w-handle-beige/ and the installation manual can be found at - https://productmanual.aosom.com/IN2...00110-009_840-192_02-0676_01-0679_840-148.pdf
Below are pictures of the type of property (I intend to leave 4 bricks of space between the top of the french doors before drilling for the awning.) and the anchors included with the awning.

Any advice would be greatly appreciated.

Thanks!

DAZB · 26 Jun 2024

You can drill into the mortar joint and use these or similar .....

Diall Zinc-plated Carbon steel Sleeve anchor M10 (L)75mm, Pack of 4 | DIY at B&Q

This pack of four carbon steel sleeve anchors from Diall are and suitable for fixing items such as radiators, satellite dishes, signs, shutters and garage doors on concrete, stone, block work and solid brick.

www.diy.com

Rawlplug Rawlbolts M10 x 75mm 5 Pack - Screwfix

Order online at Screwfix.com. General purpose anchor bolt. Ferrule marked with hole for correct installation. Use in concrete, brickwork and stone. FREE next day delivery available, free collection in 1 minute.

www.screwfix.com

d_d · 27 Jun 2024

Thank you. There are 3 brackets to fit though and chances are at least one of them won’t align with the mortar.
What fixing should I use if I need to drill into a brick?

DAZB · 27 Jun 2024

You may have to resort to a resin fix option if you need to drill into a brick and the self mixing cartidge types are very good at doing the job. Drill the hole as normal and squirt in as much resin as you can so it fills the brick cavity then set in the bolt as before and snug it up on the bracket but don't overtighten and once set it will be solid.

Rawlplug R-KEM II Styrene-Free Polyester Resin 300ml - Screwfix

Order online at Screwfix.com. Low odour bonded anchor suitable for solid and hollow substrates. Suitable for repetitive use in confined spaces and can be used in water-filled holes (except sea water). For use with standard silicone gun. Supplied with 2 x nozzles. FREE next day delivery...