Beeping Alarm

S

stender

Joined
5 May 2008
Messages
284
Reaction score
0
Location
Essex
Country
United Kingdom
Hi All, I've just moved in to a new house and have an alarm panel in the garage which keeps beeping every minute. It's a Friedland SA5 Response Alarm. If I look on the panel display it says disarm ready but has a flashing light called ALARM/MEM MESSAGE. Any ideas how I stop thebeeping? I have 2 keyfobs for it which i might of pressed. Also I have a sheet from the previous owners which shows a "system House Code" is that the code to turn on/off it's shown as on/off switches? Also has a different number under DISARM section which has confused me what the difference between the 2 is?

Thanks in advance
 
I have that but I can't find anything about the bleeping. Also not clear on the codes. It says the houe code is used to configure the keyfobs but doesnt say that is used to arm/disarm. Also doesnt answer my disarm code query.
 
Think you mite need to clear the memory .
When alarm has been activated you need to clear the memory to stop the bleeping.
Look at the instructions on how to clear memory. You may be able to do this with the remote fob?
 
I found in the manual to press esc button to stop it which cleared the flashing alarm mem message light and stopped the beeping for a while but it’s back as before. I’m loathe to touch anything until I know what the above mentioned codes are in case I need to turn the alarm off.
 
Are any other lights on the control panel flashing ?
Battery light ?
Post photo of control panel as could help
 
No other lights. I think I need to scroll through menu to see what message there is but I don’t want to touch it until I know which code disarms it.
 
You must log in or register to reply here.
Back
Top